I am new to the site. I have a 03 2500 quad cab long bed 4x4. It has a bullydog trippledog w/outlook, 5 inch straight pipe,airaid intake and the silencer ring is gone. I was wondering the power #'s of this setup and what else I could do to get more power without killing the engine.

 

It isn't the engine you'll kill; it is the tranny.

 

I have an upgraded torque converter and valve body.

 

You could get rid of the factory lift pump and go with a FASS system or a GDP kit so you can get enough fuel pressure. After that, the mods are going to start getting expensive. First you need to have the tranny built up to handle any more mods than you have now. After that, you can get some new injectors or nozzles and then you can get a better turbo. Just some ideas. Oh, by the way, welcome to the site.

 

Thanks, I was also wondering about stacking programmers. Which one works good with the bdtd and would a boost fooler be a good thing. I was also wondering what my et's would be. Thanks again.

 

A TST box would be good to stack with a bully dog.