Dodge Diesel - Diesel Truck Resource Forums

3rd Gen Engine and Drivetrain -> 2007 and up 6.7 liter Engine and Drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Edge Insight and rail pressure

Thread Tools
 
Search this Thread
 
Old 08-11-2009, 01:58 PM
  #1  
Registered User
Thread Starter
 
klx650a2's Avatar
 
Join Date: Oct 2007
Location: Saskaberia, SK
Posts: 1,801
Likes: 0
Received 1 Like on 1 Post
Edge Insight and rail pressure
I have the insight installed and am getting rail values from 5000 to 14000. Are these values right?
klx650a2 is offline  
Reply Like
Old 08-12-2009, 11:11 AM
  #2  
Registered User
Thread Starter
 
klx650a2's Avatar
 
Join Date: Oct 2007
Location: Saskaberia, SK
Posts: 1,801
Likes: 0
Received 1 Like on 1 Post
After more careful observation of these values, I think the numbers are more where they should be. At idle, its about 7k and at WOT its close to 28k psi. I come from a second gen truck and am used to viewing the lift pump values and am used to seeing higher numbers at idle and lower under WOT.
klx650a2 is offline  
Reply Like
Old 08-12-2009, 12:17 PM
  #3  
Chapter President
 
cbrahs's Avatar
 
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes on 4 Posts
yup normal
cbrahs is offline  
Reply Like
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Smarty and Edge insight or H&S mini maxx?
2006BLKMegacab
3rd Gen High Performance and Accessories (6.7L Only)
6
01-15-2011 01:33 PM
Smarty Pod and Edge Insight question
TORQUEWILD4X4
3rd Gen High Performance and Accessories (5.9L Only)
1
01-17-2009 09:02 AM
Need insight on "insight"
kcbarnes
3rd Generation Ram - Non Drivetrain - All Years
5
05-04-2004 11:08 AM
Back to Subforum
3rd Gen Engine and Drivetrain -> 2007 and up
View Next Unread
Hankook Dynapro ATM




Advanced Search
Quick Reply: Edge Insight and rail pressure


Reply Closed Thread Share

All times are GMT -5. The time now is 11:04 AM.