Rev Limiter?
Thread Starter
Registered User
Joined: Oct 2003
Posts: 16
Likes: 0
From: Houston TEXAS
Rev Limiter?
Does my 2003 HO 6 Spd have a rev limiter?
How high is too high?
Red marks on the Tach start at 3200 RPM
Have seen it go as high as 3500 PRM
before I realized.
Still getting used to driving a Diesel.
Diesel Fool
How high is too high?
Red marks on the Tach start at 3200 RPM
Have seen it go as high as 3500 PRM
before I realized.Still getting used to driving a Diesel.
Diesel Fool
Registered User
Joined: Feb 2003
Posts: 1,123
Likes: 0
From: Laredo, Tx, 7 hours south of Dallas
Re:Rev Limiter?
Your truck has four idles.
"Hot" Idle, which is approximately 800RPM
"Cold" idle which is ~1,000RPM
High Idle, full load ~3,200RPM
High Idle No Load, ~3,500RPM
That is assuming the ISB-e 24V is the same as the ISB 24V.
I spin my 12V to 3,500RPM daily, and 4,000RPM at the track.
I spin my 24V to 3,700RPM (But I think I had a wak cylinder from factory as it always had an odd vibration, unlike my silky 12V)
Merrick
"Hot" Idle, which is approximately 800RPM
"Cold" idle which is ~1,000RPM
High Idle, full load ~3,200RPM
High Idle No Load, ~3,500RPM
That is assuming the ISB-e 24V is the same as the ISB 24V.
I spin my 12V to 3,500RPM daily, and 4,000RPM at the track.
I spin my 24V to 3,700RPM (But I think I had a wak cylinder from factory as it always had an odd vibration, unlike my silky 12V)
Merrick
Thread
Thread Starter
Forum
Replies
Last Post
truckjunkie
3rd Gen Engine and Drivetrain -> 2003-2007
23
May 5, 2005 03:21 PM
ARAcummins
3rd Gen High Performance and Accessories (5.9L Only)
5
Oct 24, 2004 09:30 PM