PML trans pan
Thread Starter
Registered User
Joined: Apr 2004
Posts: 174
Likes: 0
From: So. California
PML trans pan
I am planning on installing PML trans pan with next fluid change. Where did you find the best price on this pan? And how much was it. I would like to have it pre-tapped for temp probe.
Thought about going with the Mag-Hytec but seems to make sense what PML says about powder coating being an insulator.
Thanks.
Rick
Thought about going with the Mag-Hytec but seems to make sense what PML says about powder coating being an insulator.
Thanks.
Rick
Registered User
Joined: Oct 2002
Posts: 7,543
Likes: 4
From: Tomball, Texas
Banned
Joined: May 2003
Posts: 1,268
Likes: 0
From: Nashvile Tennessee
04 SO CA,
The powder coating is a real issue, caused the fluid to stay hotter longer than necessary etc. Check out wwww.yourcovers.com for lots of good info. Take a few moments to look at prices though as they are the manufacturer and will only post full MSRP prices etc.
Mark @ DPPI
The powder coating is a real issue, caused the fluid to stay hotter longer than necessary etc. Check out wwww.yourcovers.com for lots of good info. Take a few moments to look at prices though as they are the manufacturer and will only post full MSRP prices etc.
Mark @ DPPI
Thread
Thread Starter
Forum
Replies
Last Post
surfram
3rd Gen High Performance and Accessories (5.9L Only)
7
Jan 16, 2007 09:22 PM
davelinde
3rd Gen High Performance and Accessories (5.9L Only)
9
Apr 18, 2005 10:26 PM
03CTDCO
3rd Gen High Performance and Accessories (5.9L Only)
3
Feb 22, 2005 11:46 AM