Dodge Diesel - Diesel Truck Resource Forums

3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

p0337

Thread Tools
 
Search this Thread
 
Old Aug 23, 2008 | 04:09 PM
Share
  #1  
gcssr's Avatar
gcssr
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 414
Likes: 7
From: new braunfels, tx 78130
p0337
where do i buy crank position sensor 2004.5 325/600.
code appeared (6) six times. or is there a way to clean sensor?
Reply
0
Old Aug 23, 2008 | 09:57 PM
Share
  #2  
BigIron70's Avatar
BigIron70
Cummins Guru
15 Year Member
Liked
 
Joined: Feb 2008
Posts: 4,191
Likes: 65
From: Sunny Southern California Land of Fruits and Nuts
Cranksensor
Check for water in connector at sensor. Replace sensor if resistance is not between 900 to 1100 ohms
Reply
0
Old Aug 23, 2008 | 10:07 PM
Share
  #3  
Akchevyman's Avatar
Akchevyman
Registered User
 
Joined: Aug 2008
Posts: 13
Likes: 0
From: Idaho
I just read the Wire chaffing thread you might want to look into that also. Good luck and have a great day.
Reply
0
Old Aug 24, 2008 | 12:38 AM
Share
  #4  
gcssr's Avatar
gcssr
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 414
Likes: 7
From: new braunfels, tx 78130
thanks i copied the procedure and will look at all in the am thanks again grant
Reply
0
Back to Subforum
3rd Gen Engine and Drivetrain -> 2003-2007
View Next Unread
Vibration




Advanced Search

All times are GMT -5. The time now is 10:29 AM.