New ECM Flash
Thread Starter
Always a day late, and a dollar short.
Joined: Nov 2007
Posts: 1,926
Likes: 0
From: Baker, MT
New ECM Flash
Anyone have this done? Didn't know it existed until I clicked the TSB & Recalls tab.
NUMBER: 18-011-11 REV. B
GROUP: Vehicle Performance
DATE: July 01, 2011
THIS BULLETIN SUPERSEDES SERVICE BULLETIN 18-011-11 REV. A, DATED MARCH 3, 2011, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE THE ADDITION OF 2004.5 MODELS.
HELP USING THE wiTECH DIAGNOSTIC APPLICATION FOR FLASHING AN ECU IS AVAILABLE BY SELECTING "HELP" THEN "HELP CONTENTS" AT THE TOP OF THE wiTECH DIAGNOSTIC APPLICATION WINDOW.
THE wiTECH SOFTWARE LEVEL MUST BE AT RELEASE 12.01 OR HIGHER TO PERFORM THIS PROCEDURE.
THE DRBIII(R) FLASH FILES FOR THIS BULLETIN ARE AVAILABLE ON DealerCONNECT.
SUBJECT:
Flash: Diagnostic Enhancements For Fuel System
OVERVIEW:
This bulletin provides Engine Control Module (ECM) software enhancements to improve robustness to fuel system issue detection and two new Diagnostic Trouble Codes (DTC\'s).
This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM) with new software.
Diagnostic procedures for these new DTC\'s are included in this Service Bulletin on the last 2 pages which may be printed.
The two new injector Diagnostic Trouble Codes (DTC\'s) for excessive injector return flow are:
^ P1222 - LEAK DETECTION DURING MOTORING
^ P1223 - LEAK DETECTION BASED ON QUANTITY BALANCE
MODELS:
**2004.5 DR Ram Truck (2500/3500 Pick UP)**
2005 - 2007 DH Ram Truck (2500 Pick Up)
2006 - 2007 D1 Ram Truck (3500 Pick Up)
NOTE:
This bulletin applies to vehicles equipped with a 5.9L Cummins Diesel Engine (sale codes ETC or ETH).
NUMBER: 18-011-11 REV. B
GROUP: Vehicle Performance
DATE: July 01, 2011
THIS BULLETIN SUPERSEDES SERVICE BULLETIN 18-011-11 REV. A, DATED MARCH 3, 2011, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE THE ADDITION OF 2004.5 MODELS.
HELP USING THE wiTECH DIAGNOSTIC APPLICATION FOR FLASHING AN ECU IS AVAILABLE BY SELECTING "HELP" THEN "HELP CONTENTS" AT THE TOP OF THE wiTECH DIAGNOSTIC APPLICATION WINDOW.
THE wiTECH SOFTWARE LEVEL MUST BE AT RELEASE 12.01 OR HIGHER TO PERFORM THIS PROCEDURE.
THE DRBIII(R) FLASH FILES FOR THIS BULLETIN ARE AVAILABLE ON DealerCONNECT.
SUBJECT:
Flash: Diagnostic Enhancements For Fuel System
OVERVIEW:
This bulletin provides Engine Control Module (ECM) software enhancements to improve robustness to fuel system issue detection and two new Diagnostic Trouble Codes (DTC\'s).
This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM) with new software.
Diagnostic procedures for these new DTC\'s are included in this Service Bulletin on the last 2 pages which may be printed.
The two new injector Diagnostic Trouble Codes (DTC\'s) for excessive injector return flow are:
^ P1222 - LEAK DETECTION DURING MOTORING
^ P1223 - LEAK DETECTION BASED ON QUANTITY BALANCE
MODELS:
**2004.5 DR Ram Truck (2500/3500 Pick UP)**
2005 - 2007 DH Ram Truck (2500 Pick Up)
2006 - 2007 D1 Ram Truck (3500 Pick Up)
NOTE:
This bulletin applies to vehicles equipped with a 5.9L Cummins Diesel Engine (sale codes ETC or ETH).
Thread
Thread Starter
Forum
Replies
Last Post
Flattman
3rd Gen Engine and Drivetrain -> 2007 and up
2
Oct 16, 2007 01:07 PM
CamperAndy
3rd Gen Engine and Drivetrain -> 2003-2007
2
May 18, 2007 12:36 AM
8mpg
3rd Gen Engine and Drivetrain -> 2003-2007
8
Apr 28, 2006 10:08 AM
04RAM2500
3rd Gen Engine and Drivetrain -> 2003-2007
13
Dec 17, 2004 10:02 PM
Cummins600
3rd Gen High Performance and Accessories (5.9L Only)
1
Oct 5, 2004 07:51 AM