New Ball joints
#1
Registered User
Thread Starter
New Ball joints
I just replaced one side upper and lower balljoints on my truck.I used XRF.How tight should the steering knuckle be once it is installed.I torqued the uppers to 70 and the lowers to 160.The knuckles seems very tight when I push it left to right.
Thread
Thread Starter
Forum
Replies
Last Post
firebill1720
3rd Gen Engine and Drivetrain -> 2003-2007
20
03-05-2010 09:23 AM
njmaier
3rd Gen Engine and Drivetrain -> 2003-2007
15
07-26-2006 07:43 AM
Seeder
3rd Gen Engine and Drivetrain -> 2003-2007
2
02-15-2006 08:15 PM