hey guys, i have the plastic intercooler on my 05, does anyone have a metal one willing to make me a deal on?? i know this is not the wanted section, i just figured this thread would get some attention. thanks, justin...

 

Why not buy an aftermarket one like Banks?

 

i have been told not to waste the money. alot of guys say the metal cooler are just fine for moderate power gains....

 

Does anyone know if the stock I/C from a 6.7 will fit on a 5.9? I'm thinking that this would be cheap upgrade.

 

hello i have a intercooler of an 06 for sale if you still need one. i put on a banks kit with a new intercooler. price is 350.00 plus shipping. about 125.00
this thing is not light. please let me know if you still need thanks

 

I don't know how many miles are on your truck but the intercooler is covered for 100,000 miles and they will replace it with the metal one.

 

ramrod, are you sure.... i was reading on here where some guys split the intercooler and dodge didn't want to cover it under warranty..

 

I know 5 people personaly that had their intercooler replaced by dodge when the plastic tank broke and all were replaced with metal ones, If you are over the 3-36000 miles you will have a $100 deductable

 

ok, i have 45000 on the clock and i have an extended warranty because i purchased the truck used. i guess i will run it until it blows.

 

If it ain't broke- don't fix it!!!

 

If I had the plastic intercooler I would take a punch and hammer and hit it in the corner. It will fail!!! how far from home do you want to be when it does. And if it does make it out of Warranty you will be stuck with the bill.
This was a big problum and their should have been a recal, mid way threw 05 they went back to all metal tanks.

 

PM sent...

 

This just happened to me. I felt it break with out even boosting at full psi. anyhow, i took it into the dealer, which happens to be owned by a good friend. He doesn't void my warranty, and i also have an aftermarket type warranty that are a waste of money, and they won't cover it. I am totally fustrated.

 

Whats an "aftermarket type warranty"?

 

I got a universal aftercooler all aluminum 24" x 12" x 4" with 3" inlet and outlet thats rated for a working load of 40 to 45 psi from cx racing for $125. get a couple new boots and make one like that fit your truck it wont cost big bucks