2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Water Drip Inside Cab!

Old Jul 10, 2004 | 10:08 AM
  #1  
squirlchasr919's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 183
Likes: 0
From: virginia beach, va
Water Drip Inside Cab!

Hey guys I got a 96 and just recently I noticed that I have water dripping on the passenger side floorboard. It looks like it's comming from under the dash. It only drips when the AC is on. Could it be just a line getting condensation on it and dripping? I know the Heat-AC lilnes run right through the firewall right there. I know this really isn't enough information to give a proper diagnosis but any help would be appreciated.
Thanks
Reply
Old Jul 10, 2004 | 10:37 AM
  #2  
sherod's Avatar
Registered User
 
Joined: Jan 2003
Posts: 655
Likes: 9
From: Vine Grove Ky
Most likely your drain is clogged. Look under the hood for a rubber line on your firewall sticking out about an inch. Bet you will find it either gone, or a mud dobber used it for a nest. Probably will be able to run a little something up it and fix your drip.
Reply
Old Jul 10, 2004 | 11:00 AM
  #3  
MnTom's Avatar
Registered User
 
Joined: Nov 2002
Posts: 1,234
Likes: 0
From: outside of Duluth MN
Try taking a shop vac and put the hose over the drain. That should suck the crap out.
Tom
Reply
Old Jul 11, 2004 | 10:08 AM
  #4  
squirlchasr919's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 183
Likes: 0
From: virginia beach, va
I looked the whole firewall over, I didn't see any rubber hose that could be a vent tube or any hole that could have had a hose on it. I only saw two hoses comming out of the firewall on that side and both run into a black bottle.
Reply
Old Jul 11, 2004 | 10:24 AM
  #5  
sherod's Avatar
Registered User
 
Joined: Jan 2003
Posts: 655
Likes: 9
From: Vine Grove Ky
OK, your very close. Directly underneath the bottom of the "black bottle", reach under and you will find it. If yours if 4x4, it may be easier to see it from the bottom. It should stick out about 1 inch and will be about 1/2 inch diameter.

Ed
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BearKiller
1st Gen. Ram - All Topics
6
Jul 11, 2022 02:43 PM
dslpwr81
3rd Gen Engine and Drivetrain -> 2003-2007
28
Jan 26, 2009 09:08 PM
DodgeCowboy
2nd Gen. Dodge Ram - No Drivetrain
1
Jul 28, 2007 09:46 AM
b4wheeler
24 Valve Engine and Drivetrain
3
Apr 18, 2007 03:54 PM
BearKiller
1st Gen. Ram - All Topics
38
Feb 15, 2007 10:39 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:50 PM.