Well I just picked up a 99' 2500 Ram a few weeks ago, I've just been going over it trying to fix whatever broke or missing. The whole cup holder section is gone, I'm trying to figure out what excatly I need to fix it. I need to see what it looks like, so if you could post some pics up that would be helpful. Also links to any sites or dodge wrecking yard where I could get used parts. Tjanks in advace for the help

Can you even post pics in these threads?
Part # would work.

 

mydodgeparts.com has some exploded views. Give more details on what your truck is and what you are looking for.

 

My 2002 Dodge CTD



Mom's 1996 Dodge Gasser


I hope this help you out...

As for posting pics you go to use the member photo gallery and upload them there. Then you can post the link to these pics.

Before I forget... "welcome to DTR" you might also fill out your signature so we know what kind of truck you got...

 

And I'll get more later today.

 

BB

what that under your back seat a down fireing box would give you more base and also protect those subs cleaner job and how did you get 4 gages on that post

 

Hey BB your FP is crooked
You running the little teflon line to it or did you manage to snake the SS braided up to it?

 

I actually prefer the way the subs sound facing out. It sound a little crisper and cleaner to me. They are 800w RMS audiobahn 12's. It's hard to fit those under the seat. I'm working on building a different type of sub box, might do downfire, not sure though. I fiberglassed the 4th gauge pod onto an existing 3 gauge pillar.

Actually, Merrick sent me what looks like either -6 or -8 line to run to the gauge. One way or another, the line is about 1/2" in diameter and it's a pain to route up in there. Once I get the time, money, and motivation I'm gonna change it to a small line.