Ok here goesI'm new to this site and I'm need of some help. So here the problem I own a 1998 dodge 24v with 100,000 miles and all stock....a few weeks ago I notice my drivers side rear light harness was chewed on so I repaired it and I have everything working but my running lights and my instrument panel lights so I was messing around with the headlight switch and they came on for brief minute then off again so I replaced the switch and nothing so I purchased a pigatil harness for the swwitch but haven't put it on yet so has anyone had this problem or think it cud be the harness? Any help wud be appreciated




Brandon

 

A lot of people have problems with the switch and harness melting, there was even a recall for it on some years where relays were added to take the load of the switch and wiring.
Recall> http://dodgeram.info/tsb/recalls/819.htm

 

Well I replaced the switch and harness and still no luck I've got a 98 1/2 24 valve. Do anyone know what else it could be cause I checked the fuses and there all ok

 

well finally figured it out guys appreciate it

 

What was the problem?

 

the problem was in the wiring harness that goes to the headlight switch so i replaced it and its working good now