Aftermarket Control Arms
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: Napa,CA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Control Arms
Well in my quest of getting rid of the Skyjacker junk, I found out I need a set of control arms. Was looking for a set 1/2" longer to help with the Carli starter 3" kit. DTprofab has some for a 98-2002. Im assuming earlier models (like mine) have a smaller/larger bolt? Also came across a company caller 4wheelfab in Kansas. They offer a set of custom length CAs for $199. Very tempted. Does anyone have any experience with this company. I know I can get them from Kore/Carli/others, but a grand is not in the budget. I have even thought of just getting some stockers.. Any thoughts are greatly appreciated
#2
Registered User
Join Date: Dec 2003
Location: Southwest Wyoming
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
I bought a set of control arms from that oufit (4wheelfab) and have been very happy with them. Just normal driving highway and dirt roads. They were made to get the axle recentered compensating for the 2 inch lift pucks the previous owner had installed. Firmer ride than stock units, even able to reuse all but one of the mounting bolts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wicked500R
Performance and Accessories 2nd gen only
13
03-19-2009 05:03 PM
JHew84
Performance and Accessories 2nd gen only
1
06-30-2008 08:10 PM
hellotbone
Performance and Accessories 2nd gen only
2
11-21-2003 07:44 AM