Where can I find the jig for installing the bolt to keep the KDP from falling out?

 

bkay, You've got a pm.

 

I can't believe with all the post I've seen about KDP that only one person can give me any info on the jig ??? ??? Thanks Bearfoot2 but the contact you gave me can't be reached right now. If you know how to build one let me know or have one I can buy or borrow.

 

You could ask your local Texas DTR chapter, someone has to have one in you area.<br><br> Joe

 

There is also one for sale in the CLASSIFIEDS section.

 

harold makes the jigs and kits,that come with EVERYTHING ya need cept for the fan hub wrench and the aircompressor.<br><br>jig, bushings, drill bits, tap, air presure regulator device to pressureize to keep out shavings, t handle wrench, enough set screws to do 10 kdp's, and more. detailed directions included. hes gettin 69.95 out of the kits. the basic jig is less but everyone is gettin the complete kit<br><br>harolds ph no is 208 459-7849. try later this afternoon and he'll be there.<br><br>his email is rvhvnfn@juno.com <br>

 

you can also go to the Turbo Diesel Register 12 valve forums. At the top of the forums is a few posts on where and how to get the CPFF jig kit. I also hear Harold's jig is popular.