ok im shure i sound like a idiot. when i had my trans replace i got some one else to do it cause i didnt have time to do it and needed the truck for work. well i got some time now and need to replace the fly wheel. ok where is the access hole to get to the torque converter nuts. i hadnt looked to hard though, i got all the lines and controlls and x member bolts out then got tired and went home.

 

if its like my 06 their is an inspection plate underneath the exhaust. takes a 10mm socket. its a little plate with 2 bolts

 

on the bell housing passenger side. on my ford i can take the dust cover off the bottom of my trans and can get to it this on i cant. i will take a look at it im planing on working on it after work.

 

you have to look at the front of the bell housing to see it mine are all stick but the 06 had that pos dual mass which bolts on to a flex plate like an auto

 

thanks ill look at it here in a bit

 

friday night i got to lookin and thats where the access is to the tc bolts. it took all weekend but shes working fine now.