24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

Cold weather and zero fuel pressure??

Thread Tools
 
Search this Thread
 
Old Jan 7, 2010 | 03:14 PM
  #1  
rams2500's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 153
Likes: 0
From: Illinois
Cold weather and zero fuel pressure??

Every time it gets cold (10 degrees and below) my fuel pressure gauge and edge attitude both say 0 fuel pressure. Why do they do this? Warms up outside and I have pressure again. Need some suggestions. Thanks
Reply
Old Jan 7, 2010 | 03:39 PM
  #2  
trap grease's Avatar
Registered User
 
Joined: Jan 2006
Posts: 36
Likes: 0
From: Modesto Ca
get some fuel pressure isolators . auto meter makes one it uses anti freze inside the cab this should help
Reply
Old Jan 7, 2010 | 07:48 PM
  #3  
rams2500's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 153
Likes: 0
From: Illinois
Is the electronics just not seeing it because of the cold or what? I have to have pressure because the truck runs fine. Stays between 0-3 idling.
Reply
Old Jan 7, 2010 | 09:12 PM
  #4  
brandon-01's Avatar
Registered User
 
Joined: Dec 2009
Posts: 3
Likes: 0
0-3 idling? when it warms up is that what ya mean? thats no good but my edge does something similiar in the cold but it dont hit zero but it will jump really bad
Reply
Old Jan 7, 2010 | 10:14 PM
  #5  
trap grease's Avatar
Registered User
 
Joined: Jan 2006
Posts: 36
Likes: 0
From: Modesto Ca
throw out that electric stuff and install some mechanical gauges with isolators . I was in 12 f for three days this week with no problems 15 psi on gauge .
Reply
Old Jan 8, 2010 | 04:57 AM
  #6  
x1phats10x's Avatar
Registered User
 
Joined: May 2009
Posts: 66
Likes: 0
From: sissonville west virginia
its been 13 F here for a couple days and mine is never below 10 PSI but my gauge rattles really bad.
Reply
Old Jan 8, 2010 | 08:27 AM
  #7  
high bid's Avatar
Registered User
15 Year Member
Liked
 
Joined: May 2007
Posts: 2,161
Likes: 10
From: Sarasota, FL
Originally Posted by trap grease
throw out that electric stuff and install some mechanical gauges with isolators . I was in 12 f for three days this week with no problems 15 psi on gauge .
I 2nd this....15psi at idle and it's 22* here this am. Yea, cold for this part of TX.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mooktank
1st Gen. Ram - All Topics
16
Feb 26, 2007 04:27 PM
Bad Ramer Jamer
3rd Gen Engine and Drivetrain -> 2003-2007
5
Dec 20, 2005 09:16 PM
MARKY MARK
24 Valve Engine and Drivetrain
1
Jan 27, 2005 10:59 AM
joel
3rd Gen High Performance and Accessories (5.9L Only)
3
Jan 22, 2005 08:59 PM
wings
General Diesel Discussion
20
Nov 8, 2004 05:32 PM




All times are GMT -5. The time now is 05:10 PM.