What's up with this?
11-01-2009, 08:39 PM
#1
Registered User
Thread Starter
What's up with this?
I bought some injectors from new era diesel about 3 years, I was under the impression that they were somewhere around 400's cause chuck wasn't for sure what they was either but I told him I gained 11psi of boost after I put them in and he said that they should be around 400s. Here's my question I got the numbers off of them tonite.
Delphi
6801127 FXM
LJC6760524 GXM
I started searching and come to find out these are POD's but what doesn't make since is that there are 6 holes in the tip. Anybody got a ideal of what's going on. *
Delphi
6801127 FXM
LJC6760524 GXM
I started searching and come to find out these are POD's but what doesn't make since is that there are 6 holes in the tip. Anybody got a ideal of what's going on. *
11-02-2009, 06:20 AM
#3
Registered User
Join Date: Sep 2007
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Maybe someone sent in their POD's as a core and Chuck had new EDMed tips installed. I think you can have a shop check the hole diameter and spray angle if you wanted to find out for sure.