I finally got a 47rh and it came with a BD torque converter 7125X. I am going to go through the trans while it is out and was looking for recommendations from you guys as to what level to rebuild and whom to source the parts from. I do mostly highway driving and very little towing, maybe a car on rare occasions. Any input is appreciated.

 

Good find. Torque is good for up to 450 hp. Don't suppose someone changed the valve body too? Stock those transmissions were pretty good until you got over 400hp. If you want beef, you might try PATC at http://www.redrider.us

 

Thanks for the reply. It did have a BD valve body but he put the stock one back in there. No big deal as I will just put a Transgo shift kit in it. So you've had good luck with PATC?