1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Pre91.5vs 91.5-93

Thread Tools
 
Search this Thread
 
Old Jul 21, 2005 | 09:00 AM
  #1  
csramsey640's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 682
Likes: 0
From: PA
Pre91.5vs 91.5-93

I have been keeping my eye out for a 1st generation, and would like to know what differences the pre91.5 holds to the later 1st gen's. Other than innercooler. which is a better base to start working with?

Also what year did the Getrag come out?
Reply
Old Jul 21, 2005 | 09:49 AM
  #2  
Alec's Avatar
Registered User
20 Year Member
Liked
 
Joined: Apr 2002
Posts: 1,602
Likes: 93
From: Richmond, VA
Getrag was in all 1st gen years. Post 91.5 trucks have the "Chevy" style front hubs and brakes. 92 and up have a deeper frame dimension and bigger bolts for the spring bushings on the front. 92's also have the voltage regulator built into the ECM, and a crank sensor (and wiring under the dash for a tach). 92's also reset certain codes for the ABS automatically. The 91.5 to 92.5 trucks have the 21cm turbo housing . I would say get a '92.5 or later, if you have a choice . . .
Reply
Old Jul 22, 2005 | 01:11 PM
  #3  
csramsey640's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 682
Likes: 0
From: PA
Truck build date is Sept 25,1991, but listed as a 92 So im guessing it has the 21cm turbo. How much does the 12cm/14cm's go for?
Reply
Old Jul 22, 2005 | 01:13 PM
  #4  
apwatson50's Avatar
Registered User
 
Joined: May 2004
Posts: 2,867
Likes: 0
From: Golden, Colorado
12cm cheap to free, 14cm arm and a leg
Reply




All times are GMT -5. The time now is 01:14 AM.