|
Anyone running a HX35 over a S400? We've been discussing putting twins on my truck and were pondering this setup. Any thoughts or objections?
|
Originally Posted by 93Fury
(Post 2597528)
Anyone running a HX35 over a S400? We've been discussing putting twins on my truck and were pondering this setup. Any thoughts or objections?
|
Originally Posted by RSWORDS
(Post 2597510)
David, did you weld the lip on teh bottom of the cobra pipe for the v-band clamp or does it come stock like that?
|
I'm interested in seeing KTA's setup.:cool:
|
|
Man dont I feel like a [dummy],lol I forgot all about that extra pipe plug in the filter housing.
Originally Posted by CaptainChrysler
(Post 2597331)
I got lucky on the oil feed line. I was able to take everything with the turbo, oil line and fittings. The fitting from the 855 screwed right into the filter housing on the 5.9. You need a fitting that is 1/8" NPT male to whatever line you use. Make sure you use 3/8" line to feed it. Most people just get a hydraulic hose made.
On the drains, as long as both lines go downhill all the way to the nipple in the block, it should work fine. If it is too low, you will have to add a drain to the oil pan, above the normal oil level. Found a pic: http://i17.photobucket.com/albums/b7...r/IMG_3164.jpg |
So would any of you guys know were I could go and get info on that detroit turbo I have. Like specs and stuff or would any of you guys happen to know.
|
Originally Posted by 93Fury
(Post 2597528)
Anyone running a HX35 over a S400? We've been discussing putting twins on my truck and were pondering this setup. Any thoughts or objections?
RIP, at Source Automotive has sold the kits for this set up for yrs. I've driven two with HX-35/S400 and they work as well as my BD twins. Run just as cool also...up to 600 hp and 65 psi boost. RJ |
Originally Posted by BC847
(Post 2595458)
I run the HX35/40 hybrid over an HT3B . . .
It has an HX40 inlet so if you plan on running an HX35, you'll need a simple adaptor. With some Scheid 6x.06 EDM and a maxed 12mm VE, yesterdays 8.23 1/8th mile pass had the EGT's no higher than 1500*F @ 55psig boost (with a ported head, cam, big IC, etc). :) |
Originally Posted by sgreen3
(Post 2597927)
So would any of you guys know were I could go and get info on that detroit turbo I have. Like specs and stuff or would any of you guys happen to know.
|
Originally Posted by RowJ
(Post 2598011)
Works great on a 2nd Gen.
RIP, at Source Automotive has sold the kits for this set up for yrs. I've driven two with HX-35/S400 and they work as well as my BD twins. Run just as cool also...up to 600 hp and 65 psi boost. RJ |
Originally Posted by BC847
(Post 2597788)
PDR made it (welded). :)
|
| All times are GMT -5. The time now is 07:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands