pics of smoke!!
Heres mine
The 1st one is me just messing around backing out of the drive. Theres nothing wrong with the truck, I was just playing around. I had some one tell me that it sounded like crap but I was just bouncing my foot.
http://www.youtube.com/watch?v=2Sev1pQfDiM
This one just shows where my exhaust is cut off at.
http://www.youtube.com/watch?v=1e3IVL5TrE8
The 1st one is me just messing around backing out of the drive. Theres nothing wrong with the truck, I was just playing around. I had some one tell me that it sounded like crap but I was just bouncing my foot.
http://www.youtube.com/watch?v=2Sev1pQfDiM
This one just shows where my exhaust is cut off at.
http://www.youtube.com/watch?v=1e3IVL5TrE8
here's a little smoke from mine. there are a couple more vidoes on my youtube profile of the stack set up and pump mod, but this one has the most smoke
http://www.youtube.com/watch?v=OzevEtgLNxE
http://www.youtube.com/watch?v=OzevEtgLNxE
Here's some 1st gen smoke,..between the green weed's and cow crap combined with ABS, I finely had to get out and push the bale off.
Ever wished you had a "Farmer" switch to turn all the ABS crap off? LOL
Ever wished you had a "Farmer" switch to turn all the ABS crap off? LOL
I've got the mods in my sig, and dont put out the smoke you guys do. A decent puff at full throttle, but thats it. A PUFF. To the best of my knowledge and ability the pump is maxed. I did weld about 1/8" on the end of my full P screw, but dont see where that does anything. The screw seems to bottom out about 1/8" from no threads left. does that seem normal or is there somethn stopping it. It just wont go any further and scared I'll break somth'n if I put much more pressure on it.



)

I can't wait to get a better compressor!









