help finding a part

Reply Subscribe

Thread Tools

Search this Thread

Feb 11, 2008 | 02:08 PM

VjjR

Thread Starter

Registered User

Joined: Feb 2008

Posts: 25

Likes: 0

From: livermore ca

help finding a part

i need to find the outlet elbow for the intake leaving the turbo going to the intercooler. one with a 3in out let i think they came on 94 -96? to fit on a 1st gen h1c

Feb 11, 2008 | 05:41 PM

GLHS

Registered User

Joined: May 2006

Posts: 722

Likes: 0

From: Brighton CO and Cheyenne WY

I think they are all the same from 94-02. I had to cut mine and reweld to get a 90* bend; they are about 80* stock and will not clear the frame.

Feb 11, 2008 | 05:42 PM

dpuckett

Banned

Joined: Jan 2004

Posts: 1,205

Likes: 0

From: Cape Girardeau MO

I clocked my turbo outlet up a bit and got it to clear the frame. Inner fender was another story. I trimmed the inner fender with a cut-off wheel and all is well for now.

Daniel

Feb 11, 2008 | 06:48 PM

VjjR

Thread Starter

Registered User

Joined: Feb 2008

Posts: 25

Likes: 0

From: livermore ca

i know they make a 90 degree just checked my gfs 01 and it looks like an 80 degree so must of been 2nd gen 12 valves

Feb 12, 2008 | 07:10 PM

VjjR

Thread Starter

Registered User

Joined: Feb 2008

Posts: 25

Likes: 0

From: livermore ca

Quote:

Originally Posted by dpuckett

I clocked my turbo outlet up a bit and got it to clear the frame. Inner fender was another story. I trimmed the inner fender with a cut-off wheel and all is well for now.

Daniel

how was it getting a 96 intercooler in your truck?