That is going to look AWESOME with the powder coating!!
Jim |
Originally Posted by gyman98
(Post 3093737)
Can't do it any better then that!
Originally Posted by DJ Turbo.
(Post 3093757)
Amazing to know what it will look like and what it is right now a bunch of steel hope its all done in a flash!
Originally Posted by Jungle
(Post 3093864)
That is going to look AWESOME with the powder coating!!
Jim |
CE TX
I see you boxed the frame up front what will you do for the rest of the frame. |
Originally Posted by Buddy Stewert
(Post 3094002)
CE TX
I see you boxed the frame up front what will you do for the rest of the frame. |
Thanks for the kind words!
Are you going to powder coat all the hangers also? Jim |
Originally Posted by Jungle
(Post 3094528)
Thanks for the kind words!
Are you going to powder coat all the hangers also? Jim Yes sir, also all my factory cross members will be getting powder coated as well. When I get the frame back I will be taking all the small pcs. to get coated next. |
Custom Dash
Well here is a rough draft of how I will be doing my custom dash. It will be made out of 1.25" tubing and SS/Aluminum sheet then some of it wrapped in black leather. I have never like the dashes in these 1st gen trucks and the ones that I've had the gauges always failed. So I figured why not start from scratch. The dotted lines represent where it will be bent at either a 45 or 90 degree angle depending where they are at.
http://www.texas4x4.org/gallery/albu...gn_1.sized.jpg Tell me what you think, good or bad. I know some may think it's a wast of time and money, but I think it will be well worth the effort in the long run. Eric |
2 Attachment(s)
Eric,
I think it could be sweet. This pic is one idea that I am working into my 440 RC thats not done yet. Another idea is a 2nd gen dash & I know a couple guys over on RCC have done this conversion. Joecool was one of them & just do a search on RCC & it should come up. Jim |
I've seen the one that Joe Cool did over on RCC with the 2nd gen conversion, looked very nice. Trying to stay away from plastic and use mostly metal and some fabric to give it that racing/baja truck look on the inside, but still very fuctional.
I like the pics you posted above, be sure to post some pics of your setup when your done. Are you going to replace the factory gauges in the existing dash? |
CE_TX,
Where are you getting the powder coating done? Longview, White Oak, Tyler, Dallas? Just curious. |
I like man I like
|
Originally Posted by Twitchy
(Post 3096047)
CE_TX,
Where are you getting the powder coating done? Longview, White Oak, Tyler, Dallas? Just curious. I will be using the place in White Oak on Hwy 80 right before Joe Boy's U-Pull it for all the smaller stuff, I've used him before and he does a good job as well. Will be taking him a truck load when I get home this week. When I get the body back and start re assembly you need to come out one day/evening and check it out. I live north of Diana off of FM726.
Originally Posted by DJ Turbo.
(Post 3096065)
I like man I like
|
Can't wait to see the dash and console finished and are you possibly going to fab up a 3 or 4 pod a pillar system?
|
I'm keeping the 1988 OEM dash but in the link you can see my console. I still need to add all the switches yet.
http://ramchargercentral.com/rcs-tds...are-set!!/300/ Jim |
Originally Posted by DJ Turbo.
(Post 3096750)
Can't wait to see the dash and console finished and are you possibly going to fab up a 3 or 4 pod a pillar system?
Originally Posted by Jungle
(Post 3096809)
I'm keeping the 1988 OEM dash but in the link you can see my console. I still need to add all the switches yet.
http://ramchargercentral.com/rcs-tds...are-set!!/300/ Jim |
All times are GMT -5. The time now is 09:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands