92 d-350 clutch master cylinder pushrods broke off!
 

1992 dodge d-350 5 speed. Bought a clutch master cylinder from Orilleys about 2 months ago & it's held up good until today when the push rod snapped in half!
The part of the push rod still attached inside master cylinder, & is bent. I have another one on me but I can't for the life of me get the rod out. Can anyone please help me!?!

I believe they have a rubber grommet on the end that you'll have to pull on hard. Maybe clamp some vise grips on it and smack the grips with a hammer or leverage a pry bar against them?

Any I've pulled off, the push rod stayed with the booster. When the booster is shipped, there's a paper keeper on it to keep the push rod in the booster.

You must have some damage to the piston in the MC.

It's a clutch master, not the brake master.

My bad[duhhh]