Will third gen wheel fit on our first gens? What I'm saying are the bolt patterns the same between the two generations? Thanks, aaron

 

https://www.dieseltruckresource.com/...w-t255446.html

 

Reading through I it I understand what is to be done, but my truck is a dually and has 5/8" studs, with 1 1/8" lug nuts, is this still possible?

 

I didn't put the rims on a dually, so I wouldn't know. Pretty sure the holes in the rims will not be big enough. You might have to put smaller lug studs in. Idk.

 

will not work with out drilling the rims to take the 5/8 studs I did fit a 2nd gen rim on a 1st gen but I had to drill them

 

I missed the original question. Yes, the bolt pattern on both sets of rims/trucks is 8X6.5. That is 8 lugs, 6.5" apart at the farthest point on center. Hope this helps. If you find a way to get these rims mounted please make a writeup. You aren't the first to ask about a 3rd gen DRW converison. lol