yesterday i blew an upper ball joint out of the upper a arm.it's on a 1990 d350 2wd.had a used a arm on the shelf.put a new ball joint in it and started to bolt it on.the camber bolts that came out of the d350 truck have 2" cam washers on them.all the other cam bolts i have ,have 1 3/4" cam washers.has anyone come accross this problem? can't seem to figure out what part (number) to order?

 

Ran into the same thing last Dec. Parts store couldn't come up with anything different. Cleaned up the old ones and reused...

 

dodgenstein,that's no good for me.had to use the sawsall to cut the old ones off.was your truck a 250 or 350?what year?

 

1991 D250. After I found the wrong parts and went back to parts store, didn't have time to find anything else.