Post here what the Kool-Vue tow mirror loo like
Sam
Ok here's a couple pics( not very good quality took them quickly on my phone ) the first one is a pic of the wire in the base you have to route it this way to avoid pinching the wires (don't ask how I know). The red line is just so you can see easier where it has to go.
My truck allready had the support plates becouse I had tow mirrors before, just not the power heated tow mirrors. Im sure you could get the support plates from chrysler. I am sure that if you got the support plates from chrysler it would have the nuts also. The top bolt on the drivers mirror need to be shortened becouse otherwise it hits the mirror control thing. Also the support base needs the top bolt hole flattened out to get the needed room for the control switch. What I did was drill out the raised part of the support plate and weld a flat washer on instead. Im sure there are many ways to overcome that small issue. I got mine from car-stuff.com part number dg49el and dg49er they have a 24hour call center.
Trending Topics
The support plates can be bought from Dodge, the part numbers are somewhere in the TDR thread. Autopartswarehouse and car-stuff have pulled the mirrors because they were all bought out. I know, I got my box of them today, I only got the driver side because of the backorder situation. APW said I would get the other one in a week or ten days.
Get yours from car-stuff, the customer service people I dealt with were pretty lame.
Sam

Get yours from car-stuff, the customer service people I dealt with were pretty lame.Sam
Ya I figured they only dealt with vendors. Im also pretty sure car-parts.com and autopartswarehouse.com are the same company or partner companies. Becouse I bought mine from car-stuff.com but the emails say autopartswarehouse. I think if anyones interested in them the best bet would be to phone them up and see when they will be getting more, atleast that way they'll know what kind of demand for them there is.
I ordered mine a week ago through autopartswarehouse. I have since heard they are now sold out and will be a few weeks out before they get any more. I should be receiving mine today. I will keep you informed on the installation.
Clay, I paid $341.00 w/free shipping.(They sent me a 10% discount e-coupon)
Sam






