i'm trying to figure out if my rear end is a dana 70 or a dana 80. this is in a 95 ram. the # off the tab bolted to the rear end is 52069122 lf 4.10 605590-10 (that's a lower case LF in there)

if anyone can tell me if that's a dana 70 or an 80 it would be greatly appreciated

thanks in advance, ian the tool

 

605590-10 = 94-95 Dana 70, 4:10, Powr-Lok.
Right out of my Dana/Spicer book.

Brad

 

Also, on the front web, pass. side, should be cast into the axle.

like this-

[IMG][/IMG]