jdg4233

My brother has an 01 2500 auto less than 100k , new air dog and the rest of the truck is stock. When he left for work his truck was surging . He said that when he hit the breaks to kick the cruise off it died . After about an hour of bleeding injectors he got it started again . Well when he got to the house it died again and now it will not start . When you crack the injector lines open on #1,3 and 4 injectors there is plenty of fuel coming out but will not start does anyone have any suggestions ?

GoinAndABlowin

You'd have better luck putting this on the 24V engine and drivetrain forum . . . but see if it throws any codes. I guess first you had ought to hope and pray it's not the IP. I've seen a 24v put out tons of fuel at an injector and still need the pump replaced.