Hey guys, when I was doing some tranny work I lost 2 of the 4 bolts that hold the front drive shaft to the transfer case. I went ahead and put it back together with the remaining 2 (I just won't use 4x4 until I replace them), but forgot to check the diameter and thread pitch. Anybody know or have a few handy to find out for me please?

 

You should be able to get a strap and bolt set at any local parts store.

 

I want to say that those bolts are 10 x 1.5 mm. about 60 to 80 mm long.

 

The bolts seem to be standard. A number of the bolts on our American made transmissions and transfer cases are standard threads.

 

I just pulled one off and took it to the parts house. It is 7/16-14 x 1.25".

 

Gonna say there a 5/8" heads.

The strap bolts in the front are 1/4" 28 pitch.