I'm converting my dana 60 and dana 80 into single rear wheel axles by removing the spacers and using new wheels. I was wondering if anyone knew how much a set of 3500 adapters, fenders, and 6 wheels in average shape should sell for?

 

E-bay them.....should be a good market for them on e-bay

 

give ya $350 for everything! you can keep tires.

 

No spacers on the rear, you will have to use the dual wheel as an inner to line everything back up. I ran that way for a while. Also check the hub diameter of the front as some of the 3500 have a larger hub diameter. If you just take the outer rear wheels off you will have the same as single wheels just with the dual type wheels, I ran that way for a while, looked fine. Looked a lot more truckey.