What make of spacers are you running and are they hubcentric? Did you have to open your lug holes up some on the rims

 

I have the 285 Firestone Destination M/T right now with 1/4" spacers. Don't know how you guys are getting the outer rim hub centered with 1/2" spacer ???? Anyway DON'T BUY THE M/T's I wanted the A/T's, but they were on 30 day back order and I was runnin on chords. I went with the M/T's The fronts lasted me about 25,000 miles till BALD and the rears have 40,000 on them and are close to done. Plus I hated the D rating and 45 psi limit. They just can't take the weight of the diesel IMO

 

I've wondered how the D load range would hold up.Do your tires touch?

 

Where did you get your 1/2" spacers?

 

My spacers have another set of studs for the outer wheel.

I dont know what brand they are I bought them from a bud for $50. The spacers are bud piloted, same as the wheels.

X10 on the Firestone M/Ts, they need to be on Toyotas not diesels. I bought mine about 10k miles ago and see I need to start looking for somthing else pretty quick.

 

Tee, I used doubled up 1/4" spacers that i got from Napa.