N. Texas DTR Club
Hey Dan. Finally decidied you have been right all along.... at least about not liking decals.
Removed company logo off rear window and even small DTT side window decal. Also the black ODRA sticker (that was invisable anyway).
Now totally stealth.......... looks good!
Diesel-Dan is good....Diesel-Dan is wise!
RJ
Removed company logo off rear window and even small DTT side window decal. Also the black ODRA sticker (that was invisable anyway).Now totally stealth.......... looks good!
Diesel-Dan is good....Diesel-Dan is wise!
RJ
Trending Topics
Rowland I'll get pics up when I get back in college station. Probably the 2nd or 3rd. I just got back from visiting the family in oklahoma. Had to come home early cause my sister lost another friend this year. Poor kid. She shouldn't have to experience this.
Well guys here is my days story (kinda long):
1. Lets see woke up excited about machining my secondary
2. Go to shop
3. Remove turbo separate housing
4. Make sure parts are available
5. Find out my machinist is MIA
6. Try another with no luck
7. Return to shop
to reasemble back how it was
8. Hit my lower back on the vise (no big hurt good but I was cool after a couple mins)
9. 45min later back starts to tighten, and tighten...
10. Decide to go rest and allow my back to relax
11. Pain got worse much worse!!
12. Had to result to calling Mom and Dad (peds nurse, and PT)
13. They arrive, by that time I was in an uncontrollable shake/pain/whatever.. HURT
14. Finally figure that they can't really help so they drove me to the ER (Never been hospitalized, ever besides birth
)
15. IV some pain meds, CAT scan of my mid section
16. Feeling good now drugged up Until....
17. Doc comes I think I'm getting discharged...
18. "Well you had SEVERE back spasms, a bad underlying bruise (vice), and I hate to tell you this but... it's weird that this would happen at the same time ... you are in the process of passing a STONE!!
19. Sudden desire to cry
20. Here sharing my story... dreading the next 48 hors when it is supposed to pass
21. Pray for me guys!!
1. Lets see woke up excited about machining my secondary
2. Go to shop
3. Remove turbo separate housing
4. Make sure parts are available
5. Find out my machinist is MIA
6. Try another with no luck
7. Return to shop
to reasemble back how it was
8. Hit my lower back on the vise (no big hurt good but I was cool after a couple mins)
9. 45min later back starts to tighten, and tighten...
10. Decide to go rest and allow my back to relax
11. Pain got worse much worse!!
12. Had to result to calling Mom and Dad (peds nurse, and PT)
13. They arrive, by that time I was in an uncontrollable shake/pain/whatever.. HURT
14. Finally figure that they can't really help so they drove me to the ER (Never been hospitalized, ever besides birth
)15. IV some pain meds, CAT scan of my mid section
16. Feeling good now drugged up Until....
17. Doc comes I think I'm getting discharged...
18. "Well you had SEVERE back spasms, a bad underlying bruise (vice), and I hate to tell you this but... it's weird that this would happen at the same time ... you are in the process of passing a STONE!!
19. Sudden desire to cry
20. Here sharing my story... dreading the next 48 hors when it is supposed to pass
21. Pray for me guys!!
It's amazing how you young guys let the least little thing keep you down.
Hang in there..........you'll get over it!
Hang in there..........you'll get over it!Well guys here is my days story (kinda long):
1. Lets see woke up excited about machining my secondary
2. Go to shop
3. Remove turbo separate housing
4. Make sure parts are available
5. Find out my machinist is MIA
6. Try another with no luck
7. Return to shop to reasemble back how it was
8. Hit my lower back on the vise (no big hurt good but I was cool after a couple mins)
9. 45min later back starts to tighten, and tighten...
10. Decide to go rest and allow my back to relax
11. Pain got worse much worse!!
12. Had to result to calling Mom and Dad (peds nurse, and PT)
13. They arrive, by that time I was in an uncontrollable shake/pain/whatever.. HURT
14. Finally figure that they can't really help so they drove me to the ER (Never been hospitalized, ever besides birth)
15. IV some pain meds, CAT scan of my mid section
16. Feeling good now drugged up Until....
17. Doc comes I think I'm getting discharged...
18. "Well you had SEVERE back spasms, a bad underlying bruise (vice), and I hate to tell you this but... it's weird that this would happen at the same time ... you are in the process of passing a STONE!!
19. Sudden desire to cry
20. Here sharing my story... dreading the next 48 hors when it is supposed to pass
21. Pray for me guys!!

1. Lets see woke up excited about machining my secondary
2. Go to shop
3. Remove turbo separate housing
4. Make sure parts are available
5. Find out my machinist is MIA
6. Try another with no luck
7. Return to shop to reasemble back how it was
8. Hit my lower back on the vise (no big hurt good but I was cool after a couple mins)
9. 45min later back starts to tighten, and tighten...
10. Decide to go rest and allow my back to relax
11. Pain got worse much worse!!
12. Had to result to calling Mom and Dad (peds nurse, and PT)
13. They arrive, by that time I was in an uncontrollable shake/pain/whatever.. HURT
14. Finally figure that they can't really help so they drove me to the ER (Never been hospitalized, ever besides birth)
15. IV some pain meds, CAT scan of my mid section
16. Feeling good now drugged up Until....
17. Doc comes I think I'm getting discharged...
18. "Well you had SEVERE back spasms, a bad underlying bruise (vice), and I hate to tell you this but... it's weird that this would happen at the same time ... you are in the process of passing a STONE!!
19. Sudden desire to cry
20. Here sharing my story... dreading the next 48 hors when it is supposed to pass
21. Pray for me guys!!



