i just tried to call floor it and noone answered but maybe someone here knows the answer to my question does floor it charge a core on there new stage2 or 3 pump and how much are they i need to know in case i can not fix the pump that is on my truck thanks everyone

danny

 

Most of the time, john wants you to send in your own cp3 and he will upgrade it to the stage 2 or 3. I think a stage 2 is around $1195. Be patient with john, leave him a message and he will call you back.

 

i was going to leave a message but the mail box memory was full so i couldnt ill try back later just trying to get answer with having to bother him the problem with sending mine i that i wont be worth rebuilding ill need a new one i work for a cummins dealer im going to rebuild it and modify it myself but if it will not reseal then i will need a new one. the pump i have leaks so i really have 2 problems leaking and not suppling enough fuel to the rail

 

i just reliezed who you are ive seen your truck around it is bad Edit

 

GOODLUCK?!?!I've tried for a month and even was in the area at one time and never ONCE did i get a return call. Even after leaving many messages with the lady that answered the phone.

 

I faxed him when I was doing any sort of business.

 

John is a very close friend of mine and i can tell you the phone never stops, it rings all day and all night 7 days a week. I have seen him clean out his mail box on the phone and within an half hour of him returning calls it is full again. Now there is two things he could do is hire someone to answer the phone and your still going to want to talk to John, then your going to put into the loop of the return call. I know it is hard to waite you want the parts now but it is worth the waite. John is the Best
Now on the CP3 you send in a Junk CP3, you will get a Stage 3 Junk CP3 back. He uses your pump. unless he has changed in the past few months.
Hope this helps you out

 

I will also conform that John is extremely busy. The lady that answered the phone was his wife I belive. I was at his shop friday and have never heard a phone ring so much. You can look at it two ways; he can answer all the phone calls and get nothing done or take a chance at a problem, or let him work and do things his way to his liking so he can have a good turn around time. I chose the later. If you want to get ahold of him fax him or send him a pm and he will most likely return to you sooner.

 

i think everyone has taken this thread the wrond way i wasn't saying anything bad about him at all i was just woundering if someone could answer my questions on here so i wouldnt have to bother him at that time. i personaly dont know his products but everthing i have heard has been great sorry if i have offened anyone. i talked to john a long time ago and he seemed like a very nice guy

 

I think your best bet would be to send him a pm here that is what I did and it may take a day or two for response. What is wrong with your pump by the way?

 

it is leaking fuel from what looks like the front of the pump.

 

i found that calling john first thing in the am is the only way to get hold of him. i dont remember if his email is on his site, if so shoot him an email with how best to contact you.

 

ive heard is very hard to get ahold of