SuperMod 2wd puller
Registered User
Joined: Dec 2003
Posts: 1,526
Likes: 1
From: MN
NICE WORK! Those aluminum pieces really turned out great.
This is definitely one of my favorite threads to follow over the last couple of months. There's a lot of us that can't wait to see the finished product!
This is definitely one of my favorite threads to follow over the last couple of months. There's a lot of us that can't wait to see the finished product!
Thread Starter
Registered User
Joined: Oct 2001
Posts: 298
Likes: 0
From: Washington,Mo
Yep got the tailgate notched and all the body is primed.
i getting tired of polishing already I can't beleave I used to do this for a sideline.now I remember why I quit because nobody wanted to pay for the amount of time it took make thing shinny.
how have you been doing,I was going to call you the other night but I am almost out of min.on my cell have till the 25 for a new start.will talk to you later.
Dale
i getting tired of polishing already I can't beleave I used to do this for a sideline.now I remember why I quit because nobody wanted to pay for the amount of time it took make thing shinny.
how have you been doing,I was going to call you the other night but I am almost out of min.on my cell have till the 25 for a new start.will talk to you later.
Dale
Registered User
Joined: Mar 2003
Posts: 1,629
Likes: 0
From: Northwest, Minnesota USA
I'm going to run out of minutes, too.
Someone programmed my cell number into a fax machine. Those things are persistent. Called me ½ dozen times today. That's 10% of my budget plan.
You must have used the heavy grout there rockhead.
How did the head turn out after the porting?
Someone programmed my cell number into a fax machine. Those things are persistent. Called me ½ dozen times today. That's 10% of my budget plan.
You must have used the heavy grout there rockhead.
How did the head turn out after the porting?
Thread Starter
Registered User
Joined: Oct 2001
Posts: 298
Likes: 0
From: Washington,Mo
Havn't got the head or the block back from the machine shop YET he said I will get them back by next tuesday I will belaeve it when he calls me and say's come and get them.
Dale
Dale
Thread Starter
Registered User
Joined: Oct 2001
Posts: 298
Likes: 0
From: Washington,Mo
Dan started on painting the cab and front clip this week end what he is doing takes along time to do and a hell of alot of work.I will stick to doing what I know and leave the fancy painting to him.
Registered User
Joined: Mar 2003
Posts: 1,629
Likes: 0
From: Northwest, Minnesota USA
Dale;
2wd trucks run pretty tight air pressures on the rear tires compared to the mini's and tractors. A balance between holding the sidewall from squating, but loose enough to get a bit of wrinkle. This is the best photo I have to illustrate the balance.
Oh, LOTS of bead lock screws, too.
2wd trucks run pretty tight air pressures on the rear tires compared to the mini's and tractors. A balance between holding the sidewall from squating, but loose enough to get a bit of wrinkle. This is the best photo I have to illustrate the balance.
Oh, LOTS of bead lock screws, too.
Thread Starter
Registered User
Joined: Oct 2001
Posts: 298
Likes: 0
From: Washington,Mo
I,ll give you a call later on the tire's what do you think about the paint job.
Dan has been very bussy this week he got it cleared friday afternoon.Turn out Great I couldn't have asked for anything better.Sorry for somany pictures but this isn't half of them we to picture for every step of the painting.
]
Dan has been very bussy this week he got it cleared friday afternoon.Turn out Great I couldn't have asked for anything better.Sorry for somany pictures but this isn't half of them we to picture for every step of the painting.
]
