Whiskers what oil do these GV units use? I bought this off a scrapper on the way to a scrap yard, he looked at it as junk iron and a little copper wire. $75 for what I think is complete unit. This weekend I'll mess with it some. It looks to have ATF in it but very little, it may be junk but I'll find if it's usable. Thanks!

You will need the hub adapter. Some models use a bolt on adapter that bolts to your studs and extends out about 3 to 4 inches with it's own studs for the dually wheels. Some models used a hub that is the bearing carrier and all. But even if your model comes that way, you should be able to use a set of adapters off a '93 that bolt onto your hubs. The bolt patterns will all interchange. I used a hub adapter off of a '96 once also. I sold the last set I had. but you should be able to find them at a wrecking yard. the truck does not have to be a deisel, just a 1 ton.

hi, just wanted to pick your brain...! i have a 92 W250 and am wondering what needs to be done to install W350 wheels on the front axle since im putting a dana 80 dually in the rear.
will bolting on a W350 front rotor give me the spacing / offset needed or is there more involved.
thanks.
Eric email. gon2sea@msn.com