Dodge Diesel - Diesel Truck Resource Forums

Trucker13411 Trucker13411 is offline

Registered User

Last Activity: 10-31-2022 01:14 PM

About Me

  • About Trucker13411
    Truck Brand
    dodge
    Truck Model
    3/4
    Truck Year
    1995
    Truck Color
    red
    Truck Mods
    pillar gauges glowshift 60psi boost 260 trans temp and 2600 egt temp 191 deilevery valves 0# fuel plate 4k gov springs twin air intake, sinister diesel cold air intake, 5x18 ducky injectors, 5in turbo back to 12inch bed stack
    Location
    wisconsin
    Occupation
    Big farm guy
    Country of Residence
    US
    Gender
    Male

Statistics

Total Posts
Visitor Messages
Total Likes
General Information
  • Last Activity: 10-31-2022 01:14 PM
  • Join Date: 10-24-2022
  • Referrals: 0

Visitor Messages

Showing Visitor Messages 1 to 1 of 1
  1. texasprd
    10-25-2022 09:59 AM - permalink
    You can find info on the blower circuit and operation (including wiring diagrams) in the factory service manual - here's a link for downloading a free copy of the FSM: https://www.cumminsforum.com/threads...nload.1024698/
    I'm at work and I can't have the FSM on my work computer, so that's the only help I can offer at the moment. There are a couple of members on cumminsforum that I swear must have the wiring diagrams memorized - or they have a lot of free time... Read the section on the AC/heat blower in the FSM and trace the wiring diagrams. Resistor failure is not uncommon - but if I recall correctly, turning the blower switch to high bypasses the resistor. If you have no power on the high blower setting, then you need to trace back. The wiring diagrams in the FSM will lead the way.

    Lots of other good info in the tech-article stickies here: https://www.cumminsforum.com/forums/...powertrain.32/

All times are GMT -5. The time now is 04:13 AM.