power/traction?
#1
Registered User
Thread Starter
Join Date: Jan 2006
Location: Pleasanton, CA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
power/traction?
Today, I ordered the TST R49 with gauges. What kind of power should my truck be putting out with all my mods including the TST? My goal is to have 1,000 ft. lbs. to the ground. I still need injectors and billet shafts. What kind of 1/4 mile times would I get? How to the stock leaf springs hold up with big power, especially when towing?
#2
Registered User
Join Date: Nov 2006
Location: Republik of Kalifornia
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
the 37s are going to kill ya in terms of 1/4 mile but with the mods you have listed my best guess in 1/4 would be upper mid 15s with tst. with your set up on a dyno prolly in the ballpark of 390-415 max hp/ 725 tq !
sounds like a nice rig looking at your sig.
sounds like a nice rig looking at your sig.
#3
Registered User
Join Date: Jan 2004
Location: British Columbia
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
I ran a 13.7 quarter a week ago. I don't know quite where that puts you though, same motor, but I am + Smarty and you are + gearing (I have 3.73's). The TST has great top end, but you may want a programmer or pressure bix of choice to get rolling.
#4
Registered User
Join Date: Jan 2004
Location: Maritimes, Canada
Posts: 2,696
Likes: 0
Received 0 Likes
on
0 Posts
I See a BDPP....BullyDog PowerPup....The 1000ft-lbs is the hard part... I'd say you will be 450/800 and 15 or a little more in the quarter. I don't know anyone over 500hp on a Super B. I've seen a truck with similar setup do close to 550hp with a sledpuller 66, TST and BDPP extreme. Tires will hurt you maybe 30-50hp. ks
Thread
Thread Starter
Forum
Replies
Last Post