new life for the old seats
#1
Registered User
Thread Starter
Join Date: Mar 2008
Location: Victoria Texas
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
new life for the old seats
knocking around 2 day replacing a seat belt i thought about the wife not liking the - lumbar in our 2nd gen seats...simple fix = a little 1" foam in the right place then pulled the cover back WOW what a difference ,,try it
#3
Registered User
Thread Starter
Join Date: Mar 2008
Location: Victoria Texas
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
cannot really see a difference its all in the feel when ya sit, simple enough to open the covers and custom fit foam in worn or lacking areas. easy but not easy enough for me to do it again for pics sorry. i'll do it next project as long as i don't haveta put my beer down
#4
I didn't like how my seat was sloped to the left, and I had a broken wire in the side where I slide across it when getting in and out of the truck. I repaired it, it broke again in the same spot. I fixed it again, and wound up swapping the cushions between the two seats; the only real trick is the plugs on the wiring come out on opposite sides of the bottom, so pop the leather cover, switch the routing of the plugs, and put them back on. Now my seat has proper support, and the repair to my seat heater is now on the inside of the passenger seat, and much less likely to be disturbed.
Thread
Thread Starter
Forum
Replies
Last Post
Dodgezilla
Suggestions, Comments and Site Questions
5
11-06-2011 04:13 AM
chariotdriver
Fuels / BioDiesel / Diesel Prices
10
10-18-2008 10:50 PM
williamdr
3rd Generation Ram - Non Drivetrain - All Years
13
10-20-2007 09:39 PM
tennman
3rd Gen High Performance and Accessories (5.9L Only)
18
08-13-2006 10:09 AM