How to change a freeze plug
#1
How to change a freeze plug
I was doin some cleaning under the hood today and I notice that I have anti freeze seaping from one of my freeze plugs . I know they can be changed out, but since I have never done one, I dont know how . Can anyone give me some pointers on how to do this? Ive had too many dad-gum coolant related problems this year (cracked head) and I dont want to let this one go any further . Any advice will be appreciated.
Scott
Scott
#2
Registered User
I just poke a hole in the plug with a punch and pry it out. Clean the hole in the block with a wire brush and pound the new one in with an appropriate sized wood dowel or pvc pipe.
Sounds easy ehh? But it can be a bear depending on the location of the freeze plug. The 24 valves have one that leaks and requires removing the head to get at it.
Sounds easy ehh? But it can be a bear depending on the location of the freeze plug. The 24 valves have one that leaks and requires removing the head to get at it.
#3
Cool, sounds simple enough . Luckily my culprate is right between the turbo and the block. Shouldnt even require removing the turbo but we'll see how it goes.
Thanks
Scott
Thanks
Scott
Thread
Thread Starter
Forum
Replies
Last Post
Lyall
General Diesel Discussion
8
09-07-2006 06:38 AM