Ball Joints and more ball JOINTS!
03-01-2010, 03:11 PM
#1
Registered User
Thread Starter
Join Date: Sep 2007
Location: Pacific NW
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Ball Joints and more ball JOINTS!
All this talk about ball joints, 04 with 85 K miles, front leveling kit and 33" MT tires. I need ball joints and cannot decide which ones to buy, Moog is out of the question, local shop uses McQuay Noris and the part numbers are the same as the pics in the thread about sext ball joints (XRF which are said to be good). WTH i am confused, are they the same ball joints. My local shop quotes almost $600 just for ball joints! THis seems high.
Different local shop swears by Spicer and will use nothing else.
Some say Carli well cant afford to even buy them let alone labor.
Some say dynatrac are rebuldable and bad a$$.
Please am ready to replace and pay someone but want to make sure it is done right. Which ones should I use? Thanks
Different local shop swears by Spicer and will use nothing else.
Some say Carli well cant afford to even buy them let alone labor.
Some say dynatrac are rebuldable and bad a$$.
Please am ready to replace and pay someone but want to make sure it is done right. Which ones should I use? Thanks
03-02-2010, 08:24 AM
#3
Registered User
Join Date: Sep 2006
Location: Northwest MT
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
600 wouldn't be bad for joints that will last... if you were to put moogs in there it would be almost 400, so that extra 200 is worth not having to do it again in 6 months.
03-02-2010, 08:48 AM
#4
Registered User
Thread Starter
Join Date: Sep 2007
Location: Pacific NW
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Prices
DO you get what you pay for? I can get all 4 XRF BJ for $200, and the Mcquay Norris for $275. I think I will go with the McQuay. Know I need to get a ball joint tool, anyone have success with a particular one, someone mentioned the Snap-On tool and I am sure we can all afford one of those.
03-02-2010, 09:32 AM
#5
Registered User
Join Date: Aug 2007
Location: Macomb Township,Lewiston,MI
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
I have had zero complaints about the Dynatracs from any of my customers. And you may notice that Carli has some new pricing on the upper/lower ball joint package. They are starting to ship them this week.
The $$$ you were quoted for the Mquay Norris's, was that just for parts or did that include install?
The $$$ you were quoted for the Mquay Norris's, was that just for parts or did that include install?
03-02-2010, 11:41 PM
#6
Registered User
Join Date: Jul 2008
Location: Aledo, Tx
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
i'll be ordering the dynatrac ball joints. yeah, they are about 600 for the set...but they are rebuildable and should last a lot longer than the stock junk ones do. i priced out a set of regualar ball joints from a parts store here and they were about 100 a piece, so only 50 more each and i'll have a better quality product, so its worth it to me.
03-02-2010, 11:46 PM
#7
Registered User
Thread Starter
Join Date: Sep 2007
Location: Pacific NW
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
More to come
The quote was 4 Mcquay Norris ball joints, labor and an alignment. All for just under $900. I tried to tell them I will buy the ball joints and let them install beings I could get them on line at 1/3 of there MSRP price, and they said no way you have to buy them from us. What a rip I am willing to pay for labor but over a 100% mark up on parts, this just sucks I am ready to buy the tools and do it myself and say $*#& them! Looking at tools anyone got any suggestions?
Trending Topics
03-03-2010, 12:05 AM
#8
Registered User
Thread Starter
Join Date: Sep 2007
Location: Pacific NW
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
?
nyflyoda do you think it would be worth spending the extra $200 and buying the Carlil? Sounds like they are the best, anyone know if carli ball joints rebuildable?
03-03-2010, 05:03 AM
#9
Registered User
Join Date: Jul 2008
Location: Aledo, Tx
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
03-04-2010, 01:06 PM
#10
Registered User
Thread Starter
Join Date: Sep 2007
Location: Pacific NW
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Good deal
on 8lugtruckgear.com they are showing all four in a package for $800 and eligible for free shipping? Seems like a good deal. Are you doing the install yourself and if so what kind of ball joint press tool are you using?
03-04-2010, 05:46 PM
#12
Registered User
Join Date: Mar 2010
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I too am having to replace the ball joints and almost the entire front end. I ordered the XRF's from an Ebay vendors for $199. Hoping I can do these myself, I have replaced 2 wheel bearings so hopefully it won't be too hard. Besides the ball joints I am replacing both wheel bearing, both front axle ujoints, and the passenger tie rod end. Everything ordered off Ebay for under $600.
03-04-2010, 07:36 PM
#13
Registered User
Join Date: Aug 2007
Location: Macomb Township,Lewiston,MI
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
03-04-2010, 10:50 PM
#14
Registered User
Thread Starter
Join Date: Sep 2007
Location: Pacific NW
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I have been looking at the XRF for 200 off ebay also, afraid that if i dont buy good ones i will be replacing in under 50K, you know minor gravel roads no heavy off roading i bet the XRF will do fine, now just trying to find the tool kit to do it myself. If anyone has a good recommendation on a tool besides the $800+ Snap on set please post. I am interested in taking a weekend to do the install myself. Thanks
03-04-2010, 11:28 PM
#15
Registered User
Join Date: Jul 2008
Location: Aledo, Tx
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts