3rd gen wheels on a 96?
05-06-2004, 09:05 AM
#1
Registered User
Thread Starter
Join Date: Mar 2004
Location: Green Bank, NJ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
3rd gen wheels on a 96?
Im trying to find out if H2 wheels will work on a 96. I know they work on 3rd gens with the centers milled. Ive posted a few times and got no answer. So if anyone has used 3rd gen wheels on a 2nd gen that should help me figure it out.
Thanks, Matt
Thanks, Matt
05-06-2004, 11:08 AM
#2
Registered User
Join Date: Dec 2003
Location: Scotts Valley, Ca
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
3rd gens 17" from an 03' worked on my 95 2500 it was heavy duty I think dana 80 rear. although I had to break the tab inside the center caps and they seemed like the center caps where not completely on. but no mods to the rims, I have heard others putting H2 hummer rims on with a little grinding.
good luck
good luck
01-25-2005, 12:07 PM
#4
Registered User
Let's wake this thread back up!!
I would like to install factory aluminum wheels on my 97. However, I have heard the 00-02 wheels have backspace issues on the 94-99 trucks. Does anybody know how the 03-present wheels fare on the 94-99 trucks?
I would like to install factory aluminum wheels on my 97. However, I have heard the 00-02 wheels have backspace issues on the 94-99 trucks. Does anybody know how the 03-present wheels fare on the 94-99 trucks?
Thread
Thread Starter
Forum
Replies
Last Post
anonymous_1
2nd Gen. Dodge Ram - No Drivetrain
13
04-30-2020 04:29 PM
1qckdodge
Performance and Accessories 2nd gen only
12
03-05-2007 09:53 AM
Dr.Kayak
Performance and Accessories 2nd gen only
4
01-25-2005 02:58 PM