Drill, weld, or clamp frame??? Hydroformed frames.
Registered User
Joined: Mar 2005
Posts: 23
Likes: 0
From: Cross, SC
bluebull
There is a TSB (13-001-03) that covers the allowed frame modifications. I drilled my frame to install my Signature hitch per Reese which was within the guidelines of DC. My tag a long hitch was factory installed. I'd follow hitch mfg recomendations. They know the requirements set out by DC.
Phil
There is a TSB (13-001-03) that covers the allowed frame modifications. I drilled my frame to install my Signature hitch per Reese which was within the guidelines of DC. My tag a long hitch was factory installed. I'd follow hitch mfg recomendations. They know the requirements set out by DC.
Phil
Trending Topics
Thread Starter
Banned
Joined: Apr 2004
Posts: 1,410
Likes: 0
From: Where hell freezes over.
Ray Roton,
I was just on the phone with a camper sales place and they were telling me about the bolt on brackets for the reese little rocker 5th wheel hitch. I think what you have is the same as what they were talking about. How hard was it to install and did the brackets come with measuring instructions for drilling into truck bed. I understand the brackets use prexisisting holes already in the frame from dodge.
I was just on the phone with a camper sales place and they were telling me about the bolt on brackets for the reese little rocker 5th wheel hitch. I think what you have is the same as what they were talking about. How hard was it to install and did the brackets come with measuring instructions for drilling into truck bed. I understand the brackets use prexisisting holes already in the frame from dodge.
Thread
Thread Starter
Forum
Replies
Last Post
cLAYH
3rd Generation Ram - Non Drivetrain - All Years
43
Nov 12, 2020 11:43 AM
Grodyman
3rd Generation Ram - Non Drivetrain - All Years
4
Feb 6, 2009 08:36 PM
Bad Ramer Jamer
3rd Gen High Performance and Accessories (5.9L Only)
12
Dec 27, 2007 09:32 AM
moss2904
3rd Generation Ram - Non Drivetrain - All Years
13
Dec 23, 2002 01:14 PM