Dodge Diesel - Diesel Truck Resource Forums - Search Results

 
Search: Posts Made By: lglamb
Showing results 1 to 25 of 90
Search took 0.01 seconds.
Forum: HELP!
02-27-2009, 10:44 PM
Replies: 3
Views: 518
Posted By lglamb

drivers side, towards the rear (I think,...

drivers side, towards the rear

(I think, it's been a while)

If you're ready with the replacement you don't lose much fluid.


Lowell
01-17-2009, 06:47 PM
Replies: 5
Views: 694
Posted By lglamb

Purely FWIW, I tried putting the "Mystery Switch"...

Purely FWIW, I tried putting the "Mystery Switch" in. The switch itself
does not work AFAIK (don't think I used a good ground), but ever since
I have had no hunting. My theory is just taking...
05-16-2008, 06:50 PM
Replies: 3
Views: 711
Posted By lglamb

Thanks, that was the ticket. So easy it confused...

Thanks, that was the ticket. So easy it confused me. :)

Just needed to squeeze the 2 tabs and the connectors pulled right off.

So, about a dozen trips to the hardware store, $50 bucks on a...
05-15-2008, 05:07 PM
Replies: 3
Views: 711
Posted By lglamb

pcm connector

Hi all, dumb question.

I'm thinking about rigging a mystery switch for the
TC thing. Have been totally unable to take off an
electrical connector for the last 40 years without
breaking off a...
05-12-2008, 04:10 PM
Replies: 8
Views: 915
Posted By lglamb

bump. Interested in the latching relay...

bump.

Interested in the latching relay setup.

Thanks,
Lowell
04-21-2008, 11:39 AM
Replies: 1
Views: 452
Posted By lglamb

47re TC - jumping at speed

I've had the TC unlocking at 45-50mph for a while, just not driving
it enuf to work the fixes yet.

Went out to blow out some leaves from the bed, it started
unlocking/jumping all over at around...
04-23-2007, 12:42 PM
Replies: 13
Views: 806
Posted By lglamb

Just thinking, I seem to remember Florida having...

Just thinking, I seem to remember Florida having a couple "weather events" the last few years. Something to think about at least.

Somewhere on this site there's a place to request a
vehicle...
04-02-2007, 11:01 PM
Replies: 23
Views: 1,720
Posted By lglamb

Have you asked on tdiclub? People there are as...

Have you asked on tdiclub? People there are as knowledgable and helpful as anywhere, although they are more focused on the engine. If you don't want to bother registering I could proxy a post if...
02-04-2007, 11:35 AM
Replies: 2
Views: 684
Posted By lglamb

fwiw, other discussions have indicated the...

fwiw, other discussions have indicated the Sylvania special bulbs tend
to marginal increased lighting and major reductions in life time.
Forum: Other
01-22-2007, 11:56 AM
Replies: 19
Views: 1,171
Posted By lglamb

(haven't read entire thread, so don't know if...

(haven't read entire thread, so don't know if this has
been answered yet)

One of the guru's on tdiclub.com just posted he charges
$850 for all parts and labor. Also included some comparison...
01-22-2007, 11:44 AM
Replies: 19
Views: 1,602
Posted By lglamb

FWIW, when I replaced my lift pump last year, the...

FWIW, when I replaced my lift pump last year, the new
(campaign) pump came with a pressure switch and
instructions how to wire it into the ECM (sic). Or you
could just wire it to a warning light....
07-25-2006, 12:06 PM
Replies: 13
Views: 818
Posted By lglamb

Also, Geno's has a 3/8" version of the Vulcan...

Also, Geno's has a 3/8" version of the Vulcan kit.

(at least, last time I looked)
06-27-2006, 05:08 PM
Replies: 29
Views: 1,982
Posted By lglamb

$1500 installed. :) VP44 is the...

$1500 installed.

:)

VP44 is the injection pump that provides the fuel
to the injectors at a very high pressure.
At least on the 1998.5's - ... ... 2002's?
06-26-2006, 05:30 PM
Replies: 12
Views: 704
Posted By lglamb

Kinda the whole idea of the Walbro is that they...

Kinda the whole idea of the Walbro is that they are designed
to be capable of much greater pressures than what we use.
A Walbro conversion needs to have a pressure regulator
limiting/setting what...
06-26-2006, 05:16 PM
Replies: 10
Views: 973
Posted By lglamb

FWIW, just replaced my VSS (on tranny). $31 at...

FWIW, just replaced my VSS (on tranny). $31 at dealer, 1" wrench,
about a cup or two of tranny fluid. (knew to have other sensor at
the ready, and not to be laying directly underneath it) Spent...
06-26-2006, 05:01 PM
Replies: 2
Views: 786
Posted By lglamb

Thanks. Went ahead and put the new one in. ...

Thanks.

Went ahead and put the new one in. Only had to replace a cup
or two of tranny fluid, not as bad as I'd thought.

Connector had so much grime built up in it that it wouldn't fit
onto...
06-26-2006, 12:46 PM
Replies: 7
Views: 839
Posted By lglamb

I'm having pretty much the same symptoms on my...

I'm having pretty much the same symptoms on my 2001.

Put a new lift pump on saturday, maybe helped some (had
a lot of dead pedal last weekend), but still getting dp on
startup and some accel.
...
Forum: HELP!
06-25-2006, 11:52 PM
Replies: 4
Views: 1,225
Posted By lglamb

"So is this problem in the multifunction switch?"...

"So is this problem in the multifunction switch?"


If it wasn't before, it is now. :)

(I know the feeling, I just say it's genetic from my Scottish ancestry)

There was some discussiong of...
Forum: HELP!
06-25-2006, 11:42 PM
Replies: 2
Views: 526
Posted By lglamb

Oh. It only has a hole in one end. [duhhh] ...

Oh. It only has a hole in one end. [duhhh]


Got thrown a bit cause the one I took out had holes on
both ends. Turns out the filter media had come disconnected
from it's endcap, which I...
06-25-2006, 11:31 PM
Replies: 2
Views: 786
Posted By lglamb

Vehicle Speed Sensor in tranny, what for?

2001 truck, what purpose does the tranny mounted Vehicle Speed Sensor
serve?

Only mention I've seen concerned shift points, but tranny pretty much
shifts ok and TC locks decent. (Really poor...
Forum: HELP!
06-24-2006, 12:34 PM
Replies: 2
Views: 526
Posted By lglamb

quick question - fuel filter up/down

in middle of swapping lift pump (so far, kinda so good)

1. fuel filter canister has a disk piece in the bottom of it.
cleaned it some, still kinda cruddy. guessing leave it
in, but wanted to...
06-23-2006, 10:55 AM
Replies: 3
Views: 537
Posted By lglamb

Tank --> Lift Pump --> Injection Pump (VP44) ...

Tank --> Lift Pump --> Injection Pump (VP44)
...................................^
.............................FP gauge


The filter is between LP and IP. Your gauge could be
on either...
06-23-2006, 10:44 AM
Replies: 12
Views: 1,697
Posted By lglamb

Should be picking up a 4090046 today at a local...

Should be picking up a 4090046 today at a local truck shop,
$90 plus some shipping (since I didn't want to wait until
his normal truck run on Monday, thanks DieselDude!).


Lowell
06-23-2006, 10:35 AM
Replies: 19
Views: 1,690
Posted By lglamb

Dodge Demon, how did you do your regulator...

Dodge Demon, how did you do your regulator install?
What? Where? Etc?


Thanks,
Lowell
06-23-2006, 10:29 AM
Replies: 5
Views: 739
Posted By lglamb

radio replacement - dash panel removal?

Thinking about replacing the old, cheap radio with
a new, cheap radio.

Any good tricks on removing the plastic trim surrounding
the instrument panel? Other than a good yank, crack, and
"I told...
Showing results 1 to 25 of 90
 


 
Forum Jump

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.