Dodge Diesel - Diesel Truck Resource Forums - Search Results

Search: Posts Made By: saggonwaggon91
Showing results 1 to 16 of 16
Search took 0.01 seconds.
Replies: 6
Views: 1,000
Posted By saggonwaggon91

No, never did and it doesn't seem to be causing...

No, never did and it doesn't seem to be causing any issues.
10-18-2017, 09:21 PM
Replies: 37
Views: 2,825
Posted By saggonwaggon91

Most mechanics don't do rebuilds anymore. There...

Most mechanics don't do rebuilds anymore. There are plenty of people on here who build their own as well as a few who may know of a shop or 2 in your area. Your mechanic could be telling you that due...
Replies: 1
Views: 2,383
Posted By saggonwaggon91

No flasher to change out. It's all done in the...

No flasher to change out. It's all done in the computer. I tried the resistors but kept burning them up so I made some mounts under my bed behind the rear tires and used oval incandescent sealed...
09-12-2017, 08:09 AM
Replies: 18
Views: 2,533
Posted By saggonwaggon91

Smarty tech support was very good for me. Friend...

Smarty tech support was very good for me. Friend of mine with a 2004.5 had an issue where he went to change the setting and the smarty froze then went dark with his truck stuck on setting 2. Called...
05-11-2017, 05:50 AM
Replies: 6
Views: 458
Posted By saggonwaggon91

When my 91.5, Chrysler wanted about $300.00 just...

When my 91.5, Chrysler wanted about $300.00 just for the line with the temp sensor bung. Granted that waas for the A518. Ended up going and having some hyd. hose made to just replace both lines, cost...
Replies: 24
Views: 2,884
Posted By saggonwaggon91

I think that with still being stock, you...

I think that with still being stock, you shouldn't have to worry about melting pistons. Even with the smarty, unless you mod quite a bit more, you shouldn't have to worry. Advancing timing does heat...
Replies: 8
Views: 5,044
Posted By saggonwaggon91

So the silicone dont stick to the roof and makes...

So the silicone dont stick to the roof and makes removing the lenses easier if bulb replacement is needed. Its like making a permenant gasket on one side, the wd40 lets the silicone conform to the...
01-08-2017, 09:24 AM
Replies: 12
Views: 3,406
Posted By saggonwaggon91

You can swap springs however, I would thing the...

You can swap springs however, I would thing the control arm bushings, ball joints, and small brakes wouldn't like it very much. Personaly, I would swap both front and rear over to 3/4 ton, keep the...
Replies: 6
Views: 1,000
Posted By saggonwaggon91

Once the alternator wakes up, it don't move for...

Once the alternator wakes up, it don't move for as long as the truck runs. This is how mine will read all day...16v read by the scan tool 14.8ishv by the ecm
10-03-2016, 07:00 AM
Replies: 11
Views: 1,369
Posted By saggonwaggon91

Just remember its better to be tounge heavy than...

Just remember its better to be tounge heavy than tail heavy. Over the axles or just a bit forward is best. Tail heavy will get interesting real fast...
10-02-2016, 09:32 AM
Replies: 11
Views: 1,369
Posted By saggonwaggon91

Are you on the highway a lot, or is it just in...

Are you on the highway a lot, or is it just in town? If it sees quite a bit of highway then I would use a W/D. I like them on trailers that size and bigger for more stability on breezy days or when...
09-13-2016, 08:33 PM
Replies: 5
Views: 660
Posted By saggonwaggon91

I have heard that the oil pump pick-up tube...

I have heard that the oil pump pick-up tube gasket is a weak point and will take a few seconds to reprime the oil pump
09-13-2016, 06:11 AM
Replies: 6
Views: 669
Posted By saggonwaggon91

The problem for your driver window not going up...

The problem for your driver window not going up could be a number of things. If it rolled down without a problem then you could be looking at a failed switch or broken wire, or just a bad connection...
09-08-2016, 08:43 PM
Replies: 20
Views: 7,374
Posted By saggonwaggon91

I dont know if its the same for the 6.7 or not,...

I dont know if its the same for the 6.7 or not, however after looking at many failed turbo complaints on the ISX engines, it usually omes down to the actuator not making the full travel. There is a...
08-28-2016, 07:20 AM
Replies: 6
Views: 910
Posted By saggonwaggon91

You may have cut one or more during the install....

You may have cut one or more during the install. I used to see this a lot back in high school, guys would get the lip of the seal over the end of the valve but forget about the keeper groove and cut...
08-17-2016, 09:04 PM
Replies: 3
Views: 1,149
Posted By saggonwaggon91

Thinking a 370 Pete cab with a 60" flattop would...

Thinking a 370 Pete cab with a 60" flattop would have been my choice...
Showing results 1 to 16 of 16


 
Forum Jump

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.