In the process of replacing my head gasket and adding studs. Dropped the head off to get checked out and cleaned this morning. A few hours later I got the bad news that it had a couple of cracks in it.

So now I am shopping for a head. Of course I want quality and a good price. I would like to go ahead and get a o-ringed head if possible. Where is a good place to start looking?

 

Have you checked to see if it can be fixed , many cranks can be fixed a bunch of different ways , if not heres one link .http://www.citydiesel.net/12v-stock-...-22_26_48.html

 

We have 24v heads available. Also 12v heads. I think your looking for a 24v head, we can also get a head o-ringed. You can find the heads new and remanufactured under 24v perforamance and the o-ring, resurface, jetwash, and pressure testing is located in the services tab.

 

Yea, I asked the machinest about fixing it and he said they were not able to. Im looking for a 24 valve head and didnt see one at city diesel.

 

Link? Im not sure who we is.

 

How bad were the cracks? I bet more than half the guys on this board have cracked heads. Sorry, that sounded funny.

Contact TRE Diesel, Tim knows how to do the repair. If you think you need to get a new head then PDW is probably the way to go.

http://www.performancedieselwarehouse.com/

 

I bought my NEW head from www.puredieselpower.com

Garrett has some of the best prices and he does anything you want to it. I bought the new head, had it stage 2 ported and polished, 60# valve springs, 5 angle valve job with backcut valves and had it o-ringed.

 

Ill second Garrett at Purediesel power

 

Does Garrett sell 24 Valve heads?

 

yes i bieleve he does. i bought a new 12v head from him with the 5angle valve job, back cut valves, and o-rings. he has been a super guy to deal with

 

i got my 24v head right from cummins. a little over $1000

 

Pure Diesel Power is the best place to go.

 

I think these guys all got it covered, Garrett will take care of you!