Shout out to Dusty @ HTS
03-08-2006, 05:32 PM
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: south west, Michigan
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
Shout out to Dusty @ HTS
Well, it finally happened
I thought I'd try a 15-psi launch with the new turbo, the turbo did good, the stock output shaft, not so good. So I got it loaded up and called HTS. Dusty said he had a stock shaft and a billet shaft on the shelf, get it up there and he'd fix it for free. This I wasn't expecting seeing how a broken shaft really wasn't his problem. So that SUNDAY we headed up to HTS and a couple hours later we were doing 15-psi launches in front of the shop. All in all it cost me $20 in ATF. You can’t ask for much better customer service than that.
www.HTSTRANSMISSIONS.com
Randy
I thought I'd try a 15-psi launch with the new turbo, the turbo did good, the stock output shaft, not so good. So I got it loaded up and called HTS. Dusty said he had a stock shaft and a billet shaft on the shelf, get it up there and he'd fix it for free. This I wasn't expecting seeing how a broken shaft really wasn't his problem. So that SUNDAY we headed up to HTS and a couple hours later we were doing 15-psi launches in front of the shop. All in all it cost me $20 in ATF. You can’t ask for much better customer service than that.
www.HTSTRANSMISSIONS.com
Randy
03-08-2006, 05:38 PM
#2
Registered User
Join Date: Jul 2005
Location: Climax, MI (between battlecreek and kalamazoo)
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
I'll second that. And, the next time you snap that stock output shaft you know Dusty will be there waiting with a billet one.
05-22-2006, 08:37 AM
#4
Registered User
Join Date: Jul 2005
Location: Climax, MI (between battlecreek and kalamazoo)
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Just a little advice to guys looking for aftermarket trannys, this last saturday US 131 Motorsports park hosted the Thunder Nationals and the DHRA diesel drags. My truck isn't anythings special so i didn't bother entering it to race, But i wanted to run something down the track. So Dusty gave me the keys to his truck and gave me a little advice before i headed to tech inspection "Blow it up if you can". needless to say i didn't break anything, but i did run 3 times down the track. I would like to see the other tranny builders out there show their confidence in their abilities like Dusty does. HTS builds tranny second to none.
http://www.htstransmissions.com/
Thanks Dusty 
Chris
http://www.htstransmissions.com/
Chris
05-22-2006, 06:46 PM
#6
Registered User
Join Date: May 2006
Location: MI
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
I agree Dusty is a good guy I meet him this weekend at the Merchant Dyno event , and evan thow I did not buy his trans ,he told me what to expect and that he would help me out anytime.
06-03-2006, 05:20 PM
#7
Registered User
Join Date: Jul 2005
Location: Climax, MI (between battlecreek and kalamazoo)
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Another update, running last night at the test and tune i couldn't get past the E/T 13.23 mark but had a blast anyway, and once again the HTS trans in Dusty's truck put up with it and never missed a beat!
Thanks again Dusty!
Chris
Thanks again Dusty!
Chris
Trending Topics
06-12-2006, 01:15 PM
#9
Registered User
Join Date: Jul 2005
Location: Climax, MI (between battlecreek and kalamazoo)
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Just check out his web page, all the prices are there or just call up there. Then he can figure out just what you want.
P.S. if you need anymore info i.e. site or phone number just PM me
Chris
P.S. if you need anymore info i.e. site or phone number just PM me
Chris
Thread
Thread Starter
Forum
Replies
Last Post
Evildiesel
3rd Generation Ram - Non Drivetrain - All Years
8
02-19-2009 08:09 AM