You will get a call. The installation is just like a COMP other than we have some extra stuff if you want to use it. We use an extra power wire that goes into the outside fuse box for the turbo timer. We have a fuel pressure hook up and sending unit, Thermocouple and leadwire and a switch. The switch is the only small cable you have to run from the cab to the outside. Everything else is under hood. You also have a trans/oil sensor you can install.

If you just want power it is 2 powers, 1 ground, pump wire, data bus connection, map connection switch connection and plug the main harness into the box.

You will get a call when it goes out. We had some go yesterday. We are having a couple of minor difficulties with a supplier for the switches. Once we have that sorted out they will go very fast. I hate relying on anyone but us but, I am just not setup to do cables right now but, we are working that way. At that point everything will be done 100% under 1 roof! that is just a major undertaking at this point!

I know for sure that 1 DTR member recieved his today and I just ran out of time to call and see if it go on. I looked at what shipped and I noticed his had arrived. Right now there are just over 30 people from the DTR that are on the list. We aso have about 25 from previous tests or from just website beta forms that may or may not be DTR members??

Believe me I am not wanting to keep the suspense, we will get these out as fast as possible!

 

I got the call last friday, but backed out. (I KNOW..) My truck is still under warranty and I developed some fuel pump issues (in-tank ) a week ago, didn't want to take a chance. Anyway, thanks quad for the potential oppurtunity to be a part of the testing.

 

I'm in no hurry as my head is off to PDR for a o-ring job!!! Still very excited as I can get rid of 2 box's and a programer and use 1 unit for everything, that's so sweet!!!!

 

I'll take his but with a '99 hookup.

 

Not a chance as I'll be back together by Monday!!!

 

Oh, also if you have been called and are in the beta group you need to check your email!!

 

All I can say is Wow!

You guys are going to set the 24V world on it's ear.

 

I told you Phase 3 was the coolest thing ever made for a 24v truck!!!!!

Now we just have to get it here!!!!!!!

 

If they only knew how powerful your truck is you would have one by now

 

X2!! i agree 100% quad, coolest thing ever!! thanks for not forgettin about us VP44 guys!

 

X2!!!!

 

I want it, I want it, I want it!!!! Got the email and I couldn't read the last two pages fast enough!! So excited! You couldn't tell could you??

 

will the new box get rid of the torque management in the stock software?

 

Thats awesome, I soooo can't wait to get my hands on that!!!

 

All I can say is its been a long time comming. This box will be the end all be all. I'll be sure to sell my Smarty and TST PM3 before this thing hits market so I can atleast get some money out of them, cuz after the release they won't get 25 cents for them.