Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

more psi with j-hook

Old Jan 11, 2008 | 10:20 PM
  #1  
psd tuner's Avatar
Thread Starter
Registered User
 
Joined: May 2007
Posts: 363
Likes: 0
From: Southeast, Texas
more psi with j-hook

right now i get 26 psi @ max with my j-hook. should i tighten it up, its a little smokey with my injectors. could i get 30 psi with my j-hook and other mods?
Reply
Old Jan 11, 2008 | 11:56 PM
  #2  
hink's Avatar
Registered User
 
Joined: Apr 2006
Posts: 695
Likes: 0
Originally Posted by psd tuner
right now i get 26 psi @ max with my j-hook. should i tighten it up, its a little smokey with my injectors. could i get 30 psi with my j-hook and other mods?
Yeah, tighten it up a little more. I'm seein over 40psi with my Adrenaline, I need to back mine off a little. Even with my B/Dog Torque Dog module (65hp) I was seein 32psi.
Reply
Old Jan 12, 2008 | 02:12 PM
  #3  
BigB82789's Avatar
Registered User
 
Joined: Apr 2007
Posts: 294
Likes: 0
You might have a boost leak
Reply
Old Jan 12, 2008 | 07:37 PM
  #4  
psd tuner's Avatar
Thread Starter
Registered User
 
Joined: May 2007
Posts: 363
Likes: 0
From: Southeast, Texas
good point i didnt think about a boost leak, i thought 26 psi is all it will produce. i need to check around where i put my boost pressure gauge, intercooler boots, i have seen some of them look like they might be pushed off. ill look tomorrow and give details.
Reply
Old Jan 20, 2008 | 10:08 AM
  #5  
fordkiller43's Avatar
Registered User
 
Joined: May 2007
Posts: 311
Likes: 0
From: Baghdad, Iraq/Copperas Cove, TX
I get 35 psi with my j-hook and comp box. BigB82789 may very well be right about a leak.
Reply
Old Jan 20, 2008 | 10:48 AM
  #6  
psd tuner's Avatar
Thread Starter
Registered User
 
Joined: May 2007
Posts: 363
Likes: 0
From: Southeast, Texas
checked for leaks, i didnt see any. i checked around all the boots and where i put my boost gauge.
Reply
Old Jan 20, 2008 | 11:20 AM
  #7  
bullboy85's Avatar
Registered User
 
Joined: Aug 2007
Posts: 665
Likes: 0
From: bakersfield, ca
i know different turbo but they seem to function pritty close, i got an adjustable boost elbow and closed it all the way, still with my XZT+ im only seeing 21psi, are you running injectors too to see those boost levels or should i be looking for a leak too?
Reply
Old Jan 20, 2008 | 11:38 AM
  #8  
6speedcowboy's Avatar
Registered User
 
Joined: Apr 2006
Posts: 288
Likes: 0
From: Washington
You should be seeing higher boost numbers than that with the XZT+ and boost elbow. stock I was seeing 23 psi and with the XZT+ and boost elbow on mine I have no problem getting 30+ psi of boost
Reply
Old Jan 20, 2008 | 11:43 AM
  #9  
bullboy85's Avatar
Registered User
 
Joined: Aug 2007
Posts: 665
Likes: 0
From: bakersfield, ca
humm, ok wll i guess i need to find that thred about checking boost and try it, i thought it was low, mine hits its max i think around 2500 rpms then starts droping after that, is that normal too?
Reply
Old Jan 20, 2008 | 12:01 PM
  #10  
fordkiller43's Avatar
Registered User
 
Joined: May 2007
Posts: 311
Likes: 0
From: Baghdad, Iraq/Copperas Cove, TX
Yes you should def see higher boost levels than that with that XZT+!! Somethin dont seem right their bud.
Reply
Old Jan 20, 2008 | 12:47 PM
  #11  
bullboy85's Avatar
Registered User
 
Joined: Aug 2007
Posts: 665
Likes: 0
From: bakersfield, ca
ya i know, just what? i got an idea where i might have a boost leak... shouldnt my boost keep climbing till i shift? mine strats troping at around 2500 rpms?
Reply
Old Jan 20, 2008 | 12:54 PM
  #12  
fordkiller43's Avatar
Registered User
 
Joined: May 2007
Posts: 311
Likes: 0
From: Baghdad, Iraq/Copperas Cove, TX
Yes sir. If you are on the throttle and you havent shifted yet youre boost should still increase unless you are WOT and youre boost is already maxed. Youre boost should not decrease till you let off or the trans shifts.
Reply
Old Jan 20, 2008 | 12:58 PM
  #13  
bullboy85's Avatar
Registered User
 
Joined: Aug 2007
Posts: 665
Likes: 0
From: bakersfield, ca
mine goes up to around 21 psi then strarts droping is that commen of a boost leak or something elce?
Reply
Old Jan 20, 2008 | 01:02 PM
  #14  
fordkiller43's Avatar
Registered User
 
Joined: May 2007
Posts: 311
Likes: 0
From: Baghdad, Iraq/Copperas Cove, TX
I havent experienced a boost leak myself but from what other guys have explained about boost leaks what you are describing it sure sounds like a boost leak. Especially since youre boost builds builds then starts to drop again without you shifting or letting off the throttle.
Reply
Old Jan 20, 2008 | 01:07 PM
  #15  
bullboy85's Avatar
Registered User
 
Joined: Aug 2007
Posts: 665
Likes: 0
From: bakersfield, ca
ok ill try and find it then, humm, i think it acculy on the gaskit on the intak manifold, any easy way to find it?
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:20 AM.