Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

how much horsepower and torque should i expect

Old Jul 3, 2007 | 12:12 AM
  #1  
OrangeCounty12V's Avatar
Thread Starter
Registered User
 
Joined: May 2007
Posts: 18
Likes: 0
From: Southern California
how much horsepower and torque should i expect

Hi everyone, I put my 370's in last weekend, and i couldn't be any happier with my 12 valve, although, i'm taking it easy and driving it like a grandma, since i want my stock rebuilt tranny and torque converter to last another couple months before i'm ready to upgrade to a Goerend. From there i'm hoping to do some serious modding to hit some good 1/4 mile numbers. I'm anxious to find out how much hp and torque i'm putting out, and what kind of 1/4 mile times i can expect to run once i upgrade my torque converter to a Goerend based on the mods I've listed below, so i figure i'd get some suggestions from you guys. Both of my friends think I should be putting out around 400 hp, but then again, it feels like i should be putting on more based on the seat of the pants gauge. How much HP and torque should my 12 valve be putting out, and what 1/4 mile times should i be running? Thanks everyone

William
Reply
Old Jul 3, 2007 | 09:40 AM
  #2  
TxDiesel007's Avatar
Registered User
 
Joined: Dec 2004
Posts: 3,411
Likes: 2
From: Laredo
Originally Posted by OrangeCounty12V
Hi everyone, I put my 370's in last weekend, and i couldn't be any happier with my 12 valve, although, i'm taking it easy and driving it like a grandma, since i want my stock rebuilt tranny and torque converter to last another couple months before i'm ready to upgrade to a Goerend. From there i'm hoping to do some serious modding to hit some good 1/4 mile numbers. I'm anxious to find out how much hp and torque i'm putting out, and what kind of 1/4 mile times i can expect to run once i upgrade my torque converter to a Goerend based on the mods I've listed below, so i figure i'd get some suggestions from you guys. Both of my friends think I should be putting out around 400 hp, but then again, it feels like i should be putting on more based on the seat of the pants gauge. How much HP and torque should my 12 valve be putting out, and what 1/4 mile times should i be running? Thanks everyone

William
Several factors here are to be noted..

U have a 180 horse pump on ur truck, the advantage to that is simply the large 181 DV's that it has in It. I hate to burst ur bubble, but speakin from experience here is what i got

100 plate 2/3 forward +181 DV's + 16.5 degrees of timing + a stock 215 pump + 370 injectors = 347 rwhp

I have a pump 35 horses larger and i destroyed my clutch in the process... So my best guess is that with the 370s you picked up about maybe 40-50 horses at the most, with your 0 plate perhaps about 40-50 over stock on a conservative note. I would say that your HP and TQ at just a wild guess is 250-275 rwhp and about 550-600 rwtq... perhaps at best what a stock 99-01 d max would make... Far as 1/4 mile times go, i have no clue in all honesty..

The stock dodge trans (auto) IIRC will handle no more than about 80-100 horses over stock before it starts slippin away.... but i see that ull be takin care of that pretty soon

Good luck with the BOMBing...

Rick
Reply
Old Jul 3, 2007 | 10:24 AM
  #3  
Need95-00CTD's Avatar
Registered User
 
Joined: Nov 2006
Posts: 923
Likes: 0
From: Buffalo, NY
With my 98, I had 191 DV's, a 0 plate, 17* timing, 370 EDM injectors, 4" exhaust, AFE Stage 2, and J.R. Adkins 55, and with no plate and a gutted AFC it put out 458, with a DD puller clutch. So you'd be surprised what you can put out.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LanceD
Performance and Accessories 2nd gen only
10
Jun 3, 2010 02:13 PM
dodgehotshot01
2nd Gen. Dodge Ram - No Drivetrain
6
Jan 8, 2009 05:40 PM
acook
3rd Gen High Performance and Accessories (5.9L Only)
3
Apr 1, 2007 03:42 AM
nfsommer
3rd Gen High Performance and Accessories (5.9L Only)
7
Oct 4, 2006 03:52 PM
Price_Dog
24 Valve Engine and Drivetrain
12
Nov 27, 2005 10:39 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:47 AM.