i have a bullydog big fuel kit/holly blue that i am trying to install and i am having bigtime ISSUES!!!
Dispite the fact that the instructions provided are whorrable i did the best that i could.
I attempted to hook up tot he quick disconnects at the top of the tank and then run the large hose to the IP.
After doing all of that all was hooked up and i had a nasty leake. the fuel was spouting out of the stock connection.
So i switched the hoses on the quick disconnect and fuel was spouting out of the disconnect atop the tank.
After spilling about 5 gallons of fuel on the garage floor i put everything back to the way it was (stock) and not after bleeding the system for 30+ minutes the **** truck wont start.
Any suggestions would be great. My mom wants her parking spot back in the garage so i have to move the truck

Thanks a MILLION
Aaron
My cell # is 443-871-3563 if someone would be willing to call me and shine a bit of light on my party

 

disregard this, i got it figured out with a little help from a friend of mine.
was rather easy but had me stumped.
but now i have to do a little adjusting and relocating.

I am looking at 14psi at idle and i cant get it past 9psi wide open with the edge juice w' attitude at 5/5